{"title":"Tekton Crowfoot Wrenches","description":"","products":[{"product_id":"3-8-inch-drive-x-3-4-inch-crowfoot-wrench","title":"3\/8 Inch Drive x 3\/4 Inch Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556855251229,"sku":"TT-WCF13119","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/kiw0abjdll7eyfqxbntd.jpg?v=1780093117"},{"product_id":"3-8-inch-drive-x-9-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 9 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556855513373,"sku":"TT-WCF16209","price":22.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/lddr3nxxvlpgeiiwig5i.jpg?v=1780093118"},{"product_id":"3-8-inch-drive-x-13-mm-crowfoot-wrench","title":"3\/8 Inch Drive x 13 mm Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556855546141,"sku":"TT-WCF14113","price":22.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/np5ra5wddai6aigdvtsg.jpg?v=1780093118"},{"product_id":"3-8-inch-drive-x-22-mm-crowfoot-wrench","title":"3\/8 Inch Drive x 22 mm Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556855873821,"sku":"TT-WCF14122","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/xpoxgiuevkmivztnw6jv.jpg?v=1780093119"},{"product_id":"3-8-inch-drive-6-point-flare-nut-crowfoot-wrench-set-9-piece-5-16-3-4-in","title":"3\/8 Inch Drive 6-Point Flare Nut Crowfoot Wrench Set, 9-Piece (5\/16 - 3\/4 in.)","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eThis Tekton 3\/8 Inch Drive Flare Nut Crowfoot Wrench Set features a complete range from 5\/16 to 3\/4 inch. The sizes of our flare nut crowfoot wrenches scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556855906589,"sku":"TT-WCF90120","price":136.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/c9jsv16wwqgtgbc4vst3.jpg?v=1780093119"},{"product_id":"3-8-inch-drive-x-11-16-inch-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 11\/16 Inch 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556859478301,"sku":"TT-WCF15217","price":26.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/lxhp7rkjxtz34p1bltjo.jpg?v=1780093120"},{"product_id":"3-8-inch-drive-x-14-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 14 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556912857373,"sku":"TT-WCF16214","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/mrviqx7k0pjn8dubnzjc.jpg?v=1780093178"},{"product_id":"3-8-inch-drive-x-22-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 22 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556913742109,"sku":"TT-WCF16222","price":30.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/dni9viw6b0qjxr25fjyf.jpg?v=1780093178"},{"product_id":"3-8-inch-drive-x-13-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 13 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556913774877,"sku":"TT-WCF16213","price":24.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/d92ruswnldqqxgmpizlb.jpg?v=1780093178"},{"product_id":"3-8-inch-drive-x-3-4-inch-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 3\/4 Inch 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556914987293,"sku":"TT-WCF15219","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/alhcv1kme2j4rcdm5m0i.jpg?v=1780093179"},{"product_id":"3-8-inch-drive-x-19-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 19 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51557080924445,"sku":"TT-WCF16219","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/f5ksqgz7nhstudtvaflr.jpg?v=1780093370"},{"product_id":"3-8-inch-drive-6-point-flare-nut-crowfoot-wrench-set-with-keys-21-piece-5-16-3-4-in-8-19-mm","title":"3\/8 Inch Drive 6-Point Flare Nut Crowfoot Wrench Set with Keys, 21-Piece (5\/16 - 3\/4 in., 8 - 19 mm)","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eThis Tekton 3\/8 Inch Drive Flare Nut Crowfoot Wrench Set features a complete range from 5\/16 to 3\/4 inch and 8 to 19 mm. The sizes of our flare nut crowfoot wrenches scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. This set includes portable wrench keys, molded in the USA from a high-quality polypropylene material that is durable and easy to clean. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51557258690845,"sku":"TT-WCF91320","price":288.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/x7gaxgc64otp9njnsz2k.jpg?v=1780093556"},{"product_id":"3-8-inch-drive-x-18-mm-crowfoot-wrench","title":"3\/8 Inch Drive x 18 mm Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51557565235485,"sku":"TT-WCF14118","price":24.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/wavig6hcb6nmkha3kpt5.jpg?v=1780093926"},{"product_id":"3-8-inch-drive-crowfoot-wrench-set-with-key-9-piece-5-16-3-4-in","title":"3\/8 Inch Drive Crowfoot Wrench Set with Key, 9-Piece (5\/16 - 3\/4 in.)","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51557578080541,"sku":"TT-WCF94101","price":120.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/n88gb7f3njutlensntsr.jpg?v=1780093938"},{"product_id":"3-8-inch-drive-x-7-16-inch-crowfoot-wrench","title":"3\/8 Inch Drive x 7\/16 Inch Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51557637488925,"sku":"TT-WCF13111","price":21.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/bfpinr0q5zpxqqcncrmz.jpg?v=1780093997"},{"product_id":"3-8-inch-drive-x-13-16-inch-crowfoot-wrench","title":"3\/8 Inch Drive x 13\/16 Inch Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558821396765,"sku":"TT-WCF13121","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/akxtruu587lxhpifbvyq.jpg?v=1780095340"},{"product_id":"3-8-inch-drive-x-1-inch-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 1 Inch 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558906265885,"sku":"TT-WCF15225","price":33.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/r4278rwt3i9s276tta4i.jpg?v=1780095473"},{"product_id":"3-8-inch-drive-x-8-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 8 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558960398621,"sku":"TT-WCF16208","price":22.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/vzpdgppcsoprjnfoinm8.jpg?v=1780095535"},{"product_id":"3-8-inch-drive-x-18-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 18 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51559072989469,"sku":"TT-WCF16218","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/nwrptm8z3hurdmqtds3f.jpg?v=1780095656"},{"product_id":"3-8-inch-drive-x-5-8-inch-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 5\/8 Inch 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51559315898653,"sku":"TT-WCF15216","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/exsv2wycmym4xgq4ayd2.jpg?v=1780095966"},{"product_id":"3-8-inch-drive-x-15-16-inch-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 15\/16 Inch 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51559534395677,"sku":"TT-WCF15224","price":32.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/egdnvx3r1a8tp3tnkwhl.jpg?v=1780096260"},{"product_id":"3-8-inch-drive-x-16-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 16 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51559632077085,"sku":"TT-WCF16216","price":26.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/cp3nozw07vkjbi84c5t1.jpg?v=1780096382"},{"product_id":"3-8-inch-drive-6-point-flare-nut-crowfoot-wrench-set-12-piece-8-19-mm","title":"3\/8 Inch Drive 6-Point Flare Nut Crowfoot Wrench Set, 12-Piece (8 - 19 mm)","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eThis Tekton 3\/8 Inch Drive Flare Nut Crowfoot Wrench Set features a complete range from 8 to 19 mm. The sizes of our flare nut crowfoot wrenches scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51559636009245,"sku":"TT-WCF90220","price":172.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/sqv2z2vkromgdzmlv84z.jpg?v=1780096386"},{"product_id":"3-8-inch-drive-6-point-flare-nut-crowfoot-wrench-set-with-rack-18-piece-8-27-mm","title":"3\/8 Inch Drive 6-Point Flare Nut Crowfoot Wrench Set with Rack, 18-Piece (8 - 27 mm)","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eThis Tekton 3\/8 Inch Drive Flare Nut Crowfoot Wrench Set features a complete range from 8 to 27 mm. The sizes of our flare nut crowfoot wrenches scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. This set includes a portable wrench rack that is custom-made in the USA from durable polypropylene. The rack features size-marked slots and a low-profile design, making it compatible with shallow 3-inch tool cabinet drawers. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51559928135965,"sku":"TT-WCF92220","price":278.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/dz5rekdelyzcbpt64t51.jpg?v=1780096754"},{"product_id":"3-8-inch-drive-x-14-mm-crowfoot-wrench","title":"3\/8 Inch Drive x 14 mm Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51559935344925,"sku":"TT-WCF14114","price":22.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/zibmvhyvnqwel3oxueod.jpg?v=1780096761"},{"product_id":"3-8-inch-drive-x-11-16-inch-crowfoot-wrench","title":"3\/8 Inch Drive x 11\/16 Inch Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51560157479197,"sku":"TT-WCF13117","price":24.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ejhrbsat6xleclvdwroi.jpg?v=1780096994"},{"product_id":"3-8-inch-drive-crowfoot-wrench-set-with-rack-17-piece-8-24-mm","title":"3\/8 Inch Drive Crowfoot Wrench Set with Rack, 17-Piece (8 - 24 mm)","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51560369226013,"sku":"TT-WCF95201","price":215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/wiqikqhqnuq6ikijmvmw.jpg?v=1780097298"},{"product_id":"3-8-inch-drive-x-5-8-inch-crowfoot-wrench","title":"3\/8 Inch Drive x 5\/8 Inch Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51560582021405,"sku":"TT-WCF13116","price":23.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/qqxvmd8vdmuffwtndgre.jpg?v=1780097546"},{"product_id":"3-8-inch-drive-x-1-2-inch-crowfoot-wrench","title":"3\/8 Inch Drive x 1\/2 Inch Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51560999846173,"sku":"TT-WCF13113","price":22.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/svv8z3v4g2h8gcrvc0pc.jpg?v=1780098096"},{"product_id":"3-8-inch-drive-x-24-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 24 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51561003974941,"sku":"TT-WCF16224","price":32.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/gohfev4keivqnbcd2fht.jpg?v=1780098102"},{"product_id":"3-8-inch-drive-x-7-16-inch-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 7\/16 Inch 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51561370059037,"sku":"TT-WCF15211","price":23.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/i037qy7itnnfxkdqkuue.jpg?v=1780098527"},{"product_id":"3-8-inch-drive-x-10-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 10 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51561514074397,"sku":"TT-WCF16210","price":23.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/zg9mplnbrsreogtvorvd.jpg?v=1780098710"},{"product_id":"3-8-inch-drive-x-7-8-inch-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 7\/8 Inch 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Use to disconnect brake, fuel, and hydraulic lines or oxygen (O2) sensors without rounding-off fasteners • Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Use to disconnect brake, fuel, and hydraulic lines or oxygen (O2) sensors without rounding-off fasteners. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51561517973789,"sku":"TT-WCF15222","price":30.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/dqlwyqiunmsfislcl4ef.jpg?v=1780098719"},{"product_id":"3-8-inch-drive-x-8-mm-crowfoot-wrench","title":"3\/8 Inch Drive x 8 mm Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51561585475869,"sku":"TT-WCF14108","price":20.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/lq2qqsk103bfhzvukseb.jpg?v=1780098830"},{"product_id":"3-8-inch-drive-x-16-mm-crowfoot-wrench","title":"3\/8 Inch Drive x 16 mm Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51561673392413,"sku":"TT-WCF14116","price":23.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/pepa5i98hsb1ay3k6qcp.jpg?v=1780098952"},{"product_id":"3-8-inch-drive-x-1-2-inch-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 1\/2 Inch 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51561895330077,"sku":"TT-WCF15213","price":24.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/xpnwoav2ontjqggb62cd.jpg?v=1780099201"},{"product_id":"3-8-inch-drive-6-point-flare-nut-crowfoot-wrench-set-14-piece-5-16-1-1-16-in","title":"3\/8 Inch Drive 6-Point Flare Nut Crowfoot Wrench Set, 14-Piece (5\/16 - 1-1\/16 in.)","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eThis Tekton 3\/8 Inch Drive Flare Nut Crowfoot Wrench Set features a complete range from 5\/16 to 1-1\/16 inch. The sizes of our flare nut crowfoot wrenches scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562229334301,"sku":"TT-WCF90121","price":220.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/itno9xbavn9cvafqqjyw.jpg?v=1780099623"},{"product_id":"3-8-inch-drive-crowfoot-wrench-set-with-key-17-piece-8-24-mm","title":"3\/8 Inch Drive Crowfoot Wrench Set with Key, 17-Piece (8 - 24 mm)","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562229399837,"sku":"TT-WCF94202","price":215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ifyyqi74ntn1g7fckwlp.jpg?v=1780099623"},{"product_id":"3-8-inch-drive-x-13-16-inch-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 13\/16 Inch 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562355720477,"sku":"TT-WCF15221","price":28.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/gqkc1qm0mgfeka0ctnkz.jpg?v=1780099811"},{"product_id":"3-8-inch-drive-x-12-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 12 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562406478109,"sku":"TT-WCF16212","price":24.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/afzhk5pmjjkxscankqvf.jpg?v=1780099873"},{"product_id":"3-8-inch-drive-6-point-flare-nut-crowfoot-wrench-set-32-piece-5-16-1-1-16-in-8-27-mm","title":"3\/8 Inch Drive 6-Point Flare Nut Crowfoot Wrench Set, 32-Piece (5\/16 - 1-1\/16 in., 8-27 mm)","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eThis Tekton 3\/8 Inch Drive Flare Nut Crowfoot Wrench Set features a complete range from 5\/16 to 1-1\/16 inch and 8 to 27 mm. The sizes of our flare nut crowfoot wrenches scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562409885981,"sku":"TT-WCF90321","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/jukdfxwaoqsutotd4rii.jpg?v=1780099875"},{"product_id":"3-8-inch-drive-x-23-mm-crowfoot-wrench","title":"3\/8 Inch Drive x 23 mm Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562433610013,"sku":"TT-WCF14123","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/tylyy5rhjxoqqsqitv8e.jpg?v=1780099909"},{"product_id":"3-8-inch-drive-crowfoot-wrench-set-with-keys-21-piece-5-16-3-4-in-8-19-mm","title":"3\/8 Inch Drive Crowfoot Wrench Set with Keys, 21-Piece (5\/16 - 3\/4 in., 8 - 19 mm)","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562582212893,"sku":"TT-WCF94301","price":241.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ieihdcmixwztrrn6myya.jpg?v=1780100116"},{"product_id":"3-8-inch-drive-x-17-mm-crowfoot-wrench","title":"3\/8 Inch Drive x 17 mm Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562635788573,"sku":"TT-WCF14117","price":24.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/zciuwwnyshpjjxc9ykms.jpg?v=1780100178"},{"product_id":"3-8-inch-drive-crowfoot-wrench-set-21-piece-5-16-3-4-in-8-19-mm","title":"3\/8 Inch Drive Crowfoot Wrench Set, 21-Piece (5\/16 - 3\/4 in., 8 - 19 mm)","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562639622429,"sku":"TT-WCF93301","price":230.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/fsj9j5imw28qj7qjezss.jpg?v=1780100186"},{"product_id":"3-8-inch-drive-x-15-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 15 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562720461085,"sku":"TT-WCF16215","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/zf6a6wt85ovcfjugfdzw.jpg?v=1780100296"},{"product_id":"3-8-inch-drive-x-20-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 20 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562730946845,"sku":"TT-WCF16220","price":28.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/cevjsebbh0frpgpp05me.jpg?v=1780100309"},{"product_id":"3-8-inch-drive-6-point-flare-nut-crowfoot-wrench-set-18-piece-8-27-mm","title":"3\/8 Inch Drive 6-Point Flare Nut Crowfoot Wrench Set, 18-Piece (8 - 27 mm)","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eThis Tekton 3\/8 Inch Drive Flare Nut Crowfoot Wrench Set features a complete range from 8 to 27 mm. The sizes of our flare nut crowfoot wrenches scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562932666653,"sku":"TT-WCF90221","price":272.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/mrenb8go1qhj97l3isan.jpg?v=1780100552"},{"product_id":"3-8-inch-drive-x-20-mm-crowfoot-wrench","title":"3\/8 Inch Drive x 20 mm Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51563217387805,"sku":"TT-WCF14120","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/xj05ffoj9rro1rb3yphn.jpg?v=1780100916"},{"product_id":"3-8-inch-drive-6-point-flare-nut-crowfoot-wrench-set-with-racks-32-piece-5-16-1-1-16-in-8-27-mm","title":"3\/8 Inch Drive 6-Point Flare Nut Crowfoot Wrench Set with Racks, 32-Piece (5\/16 - 1-1\/16 in., 8-27 mm)","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eThis Tekton 3\/8 Inch Drive Flare Nut Crowfoot Wrench Set features a complete range from 5\/16 to 1-1\/16 inch and 8 to 27 mm. The sizes of our flare nut crowfoot wrenches scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. This set includes portable wrench racks that are custom-made in the USA from durable polypropylene. The racks feature size-marked slots and a low-profile design, making them compatible with shallow 3-inch tool cabinet drawers. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51563233116445,"sku":"TT-WCF92320","price":435.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/vm21ymplcth23zt8xywn.jpg?v=1780100932"}],"url":"https:\/\/industrialwarehouse.com\/collections\/tekton-crowfoot-wrenches.oembed","provider":"Industrial Warehouse","version":"1.0","type":"link"}