{"title":"Tekton Hex Keys","description":"","products":[{"product_id":"3-5-mm-flat-end-hex-l-key","title":"3.5 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554692301085,"sku":"TT-KLX22035","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/eqk54pwkmgcdhndsrzyz.jpg?v=1780090556"},{"product_id":"1-5-mm-flat-end-hex-l-key","title":"1.5 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. The size is marked with a high-visibility laser marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554692497693,"sku":"TT-KLX22015","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ceygdhqiskkybaeokzk0.jpg?v=1780090557"},{"product_id":"3-32-inch-short-arm-ball-end-hex-l-key","title":"3\/32 Inch Short Arm Ball End Hex L-Key","description":"\u003cp\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton's short arm L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554693349661,"sku":"TT-KLX77094","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/eome3n0doo2xs8cyliaw.jpg?v=1780090557"},{"product_id":"star-l-key-set-with-holder-13-piece-t6-t50","title":"Star L-Key Set with Holder, 13-Piece (T6 - T50)","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking • Quick Access and Low-Profile Organization – We designed the holder to organize the L-keys facing forward so you can easily access each tool without having to move others out of the way; you can also face the L-keys to the side for a flat, low-profile organization solution\u003cbr\u003eThe Tekton 13-pc. Star L-Key Set includes the most common star key sizes from T6 to T50 stored in a durable holder with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way. The L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554693382429,"sku":"TT-KLT91402","price":34.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/mnddhaczshk2giiatkgc.jpg?v=1780090557"},{"product_id":"flat-end-hex-and-star-l-key-set-with-holders-41-piece-0-050-3-8-in-1-3-10-mm-t6-t50","title":"Flat End Hex and Star L-Key Set with Holders, 41-Piece (0.050-3\/8 in., 1.3-10 mm, T6-T50)","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n  • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n  • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n  • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n  • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking\u003cbr\u003eThe Tekton 41-Piece Flat End Hex and Star L-Key Set includes 0.050–3\/8 inch and 1.3–10 mm flat end hex L-keys, T6–T50 star L-keys, and holders. The keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two ways—both with a high-visibility laser marking and a stamped marking (the 0.050 in. and 1.3 mm keys are too small to laser mark and the 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm keys are too small to stamp). The durable hex key holders have self-aligning key slots that allow keys to be removed and inserted without moving others out of the way.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554701345053,"sku":"TT-KEY91003","price":81.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/bzw1f0bx1wygruqp3eoj.jpg?v=1780090567"},{"product_id":"7-64-inch-ball-end-hex-l-key","title":"7\/64 Inch Ball End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-Keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554701443357,"sku":"TT-KLX72109","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/mpobyhz2vu2xyyn0rz2p.jpg?v=1780090567"},{"product_id":"6-mm-flat-end-hex-l-key","title":"6 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554735882525,"sku":"TT-KLX22060","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/nj3zkavlcqrufgx4aot1.jpg?v=1780090616"},{"product_id":"5-64-inch-short-arm-ball-end-hex-l-key","title":"5\/64 Inch Short Arm Ball End Hex L-Key","description":"\u003cp\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton's short arm L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554736701725,"sku":"TT-KLX77078","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/fvlujpfjui5xeypog4th.jpg?v=1780090616"},{"product_id":"7-32-inch-flat-end-hex-l-key","title":"7\/32 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554736898333,"sku":"TT-KLX12219","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/za0aop61zwajyvepb090.jpg?v=1780090616"},{"product_id":"7-mm-flat-end-hex-l-key","title":"7 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554737586461,"sku":"TT-KLX22070","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/u1bqn0mmgfxbduddntk5.jpg?v=1780090616"},{"product_id":"1-5-mm-short-arm-ball-end-hex-l-key","title":"1.5 mm Short Arm Ball End Hex L-Key","description":"\u003cp\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton's short arm L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554738241821,"sku":"TT-KLX87015","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/dx3alb8ychy3c5wkkzky.jpg?v=1780090616"},{"product_id":"14-mm-flat-end-hex-l-key","title":"14 mm Flat End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44-50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways, with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton's flat end L-keys cover a range of large fastener sizes, including 7\/16 to 3\/4 inch and 11 to 19 mm. The keys are made from 6150 that's heat-treated to 44-50 HRC and coated with a highly corrosion-resistant manganese phosphate finish. We tightly control the tolerances of our keys and chamfer the edges for a refined tool that provides you with a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554746564893,"sku":"TT-KLX22140","price":19.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/tms99gckogbiceb35edx.jpg?v=1780090624"},{"product_id":"8-mm-ball-end-hex-l-key","title":"8 mm Ball End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-Keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554751480093,"sku":"TT-KLX82080","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/cae9ha4qyjk6crpofwaa.jpg?v=1780090628"},{"product_id":"flat-end-hex-l-key-set-15-piece-7-16-3-4-in-11-19-mm","title":"Flat End Hex L-Key Set, 15-Piece (7\/16-3\/4 in., 11-19 mm)","description":"\u003cp\u003e• High Leverage – We designed these L-keys to be longer to increase leverage when it matters\n  • Two Measures of Tolerance Control – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency\n  • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44–50 HRC to produce tools that are hard, but not brittle\n  • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n  • Clear Markings – Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking\u003cbr\u003eThe Tekton 15-Piece Hex L-Key Set includes 7\/16–3\/4 inch and 11–19 mm L-keys. The L-keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC and coated with a durable manganese phosphate finish that's resistant to corrosion. We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. The L-key sizes are marked with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554791653661,"sku":"TT-KLX90301","price":151.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/fbulmt0azhx70gvegzps.jpg?v=1780090684"},{"product_id":"10-mm-short-arm-ball-end-hex-l-key","title":"10 mm Short Arm Ball End Hex L-Key","description":"\u003cp\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eThese L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554792276253,"sku":"TT-KLX87100","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/kqhfuwlhq8rshoe55bx7.jpg?v=1780090684"},{"product_id":"4-mm-short-arm-ball-end-hex-l-key","title":"4 mm Short Arm Ball End Hex L-Key","description":"\u003cp\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton's short arm L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554792898845,"sku":"TT-KLX87040","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/mg2abqp2lfeatcfl03ka.jpg?v=1780090684"},{"product_id":"t25-star-t-handle-key","title":"T25 Star T-Handle Key","description":"\u003cp\u003e• Side Drive – In addition to the long arm, the T-handle keys have a short side drive that's ideal for breaking loose fasteners • Large, Comfortable Handle – The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Clear Markings – Each key is marked with a large, painted inset marking on the handle that's highly visible and won't wear off • Corrosion-Resistant – The T-handle keys are finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton T-handle keys have two ends—both a star long arm for spinning out fasteners, as well as a short, star side drive for breaking loose fasteners. The large, contoured handle is designed to comfortably fit your in your hand as you apply torque from various positions. The steel key is made from 8660 nickel chromium molybdenum steel and held to high tolerance standards so you can count on a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554843623709,"sku":"TT-KTT32250","price":19.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/txpo9kii75vbksftc91q.jpg?v=1780090744"},{"product_id":"t40-star-t-handle-key","title":"T40 Star T-Handle Key","description":"\u003cp\u003e• Side Drive – In addition to the long arm, the T-handle keys have a short side drive that's ideal for breaking loose fasteners • Large, Comfortable Handle – The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Clear Markings – Each key is marked with a large, painted inset marking on the handle that's highly visible and won't wear off • Corrosion-Resistant – The T-handle keys are finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton T-handle keys have two ends—both a star long arm for spinning out fasteners, as well as a short, star side drive for breaking loose fasteners. The large, contoured handle is designed to comfortably fit your in your hand as you apply torque from various positions. The steel key is made from 8660 nickel chromium molybdenum steel and held to high tolerance standards so you can count on a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554844311837,"sku":"TT-KTT32400","price":21.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/xreurjqln9pyyehjktwn.jpg?v=1780090744"},{"product_id":"5-16-inch-flat-end-hex-t-handle-key","title":"5\/16 Inch Flat End Hex T-Handle Key","description":"\u003cp\u003e• Molded Handle and Steel Key – Our T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable\n • 8660 Steel – Our T-handle keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – The size is marked in three ways: with a high-visibility laser marking, a stamped marking, and a painted inset marking that can't wear off\u003cbr\u003eTekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton T-handle keys have slightly chamfered edges and a smooth top face to optimize engagement with fasteners. We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion. The size is marked in three ways: with a high-visibility laser marking, a stamped marking, and a painted inset marking that can't wear off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554848440605,"sku":"TT-KTX31313","price":21.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/j3h5f0jqxdgnm6kepec3.jpg?v=1780090744"},{"product_id":"2-mm-ball-end-hex-t-handle-key","title":"2 mm Ball End Hex T-Handle Key","description":"\u003cp\u003e• Side Drive – In addition to the ball-end long arm, the T-handle keys have a flat-end side drive that's ideal for breaking loose fasteners • Large, Comfortable Handle – The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Clear Markings – Each key is marked with a large, painted inset marking on the handle that's highly visible and won't wear off • Corrosion-Resistant – The T-handle keys are finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton T-handle keys have two ends—both a ball-end long arm for spinning out fasteners, as well as a short, flat-end side drive for breaking loose fasteners. The large, contoured handle is designed to comfortably fit your in your hand as you apply torque from various positions. The steel key is made from 8660 nickel chromium molybdenum steel and held to high tolerance standards so you can count on a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554848473373,"sku":"TT-KTX38020","price":13.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/uhuwxmrgoc9idnzqt91q.jpg?v=1780090744"},{"product_id":"2-5-mm-flat-end-hex-t-handle-key","title":"2.5 mm Flat End Hex T-Handle Key","description":"\u003cp\u003e• Molded Handle and Steel Key – Our T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable\n • 8660 Steel – Our T-handle keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – The size is marked in three ways: with a high-visibility laser marking, a stamped marking, and a painted inset marking that can't wear off\u003cbr\u003eTekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton T-handle keys have slightly chamfered edges and a smooth top face to optimize engagement with fasteners. We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion. The size is marked in three ways: with a high-visibility laser marking, a stamped marking, and a painted inset marking that can't wear off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554848506141,"sku":"TT-KTX32025","price":13.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/boanjwmqxtfwjgzujtnk.jpg?v=1780090745"},{"product_id":"1-8-inch-ball-end-hex-t-handle-key","title":"1\/8 Inch Ball End Hex T-Handle Key","description":"\u003cp\u003e• Side Drive – In addition to the ball-end long arm, the T-handle keys have a flat-end side drive that's ideal for breaking loose fasteners • Large, Comfortable Handle – The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Clear Markings – Each key is marked with a large, painted inset marking on the handle that's highly visible and won't wear off • Corrosion-Resistant – The T-handle keys are finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton T-handle keys have two ends—both a ball-end long arm for spinning out fasteners, as well as a short, flat-end side drive for breaking loose fasteners. The large, contoured handle is designed to comfortably fit your in your hand as you apply torque from various positions. The steel key is made from 8660 nickel chromium molybdenum steel and held to high tolerance standards so you can count on a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554853257501,"sku":"TT-KTX37125","price":14.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/evzv3hsjc4ksubrmlllu.jpg?v=1780090751"},{"product_id":"1-4-inch-ball-end-hex-t-handle-key","title":"1\/4 Inch Ball End Hex T-Handle Key","description":"\u003cp\u003e• Side Drive – In addition to the ball-end long arm, the T-handle keys have a flat-end side drive that's ideal for breaking loose fasteners • Large, Comfortable Handle – The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Clear Markings – Each key is marked with a large, painted inset marking on the handle that's highly visible and won't wear off • Corrosion-Resistant – The T-handle keys are finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton T-handle keys have two ends—both a ball-end long arm for spinning out fasteners, as well as a short, flat-end side drive for breaking loose fasteners. The large, contoured handle is designed to comfortably fit your in your hand as you apply torque from various positions. The steel key is made from 8660 nickel chromium molybdenum steel and held to high tolerance standards so you can count on a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554858107165,"sku":"TT-KTX37250","price":19.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/sglrculnoxqitopjmf1q.jpg?v=1780090755"},{"product_id":"flat-end-hex-t-handle-key-set-with-stand-10-piece-2-10-mm","title":"Flat End Hex T-Handle Key Set with Stand, 10-Piece (2 - 10 mm)","description":"\u003cp\u003e• Molded Handle and Steel Key – Our T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable\n • 8660 Steel – Our T-handle keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton T-handle sizes are marked in three ways: with a high-visibility laser marking, a stamped marking, and a painted inset marking that can't wear off\u003cbr\u003eTekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton T-handle keys have slightly chamfered edges and a smooth top face to optimize engagement with fasteners. We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion. The size is marked in three ways: with a high-visibility laser marking, a stamped marking (except the 2 mm key, which is too small to stamp), and a painted inset marking that can't wear off. The included 18 gauge stand is designed to guide each key into its slot, making it easy to return your tools to their places.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51554861908253,"sku":"TT-KTX92202","price":80.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/qtt4yr5am3iwg7nvybrh.jpg?v=1780090758"},{"product_id":"t30-star-l-key","title":"T30 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51555582378269,"sku":"TT-KLT22300","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/du0wfu5h2ockrkmfx5o9.jpg?v=1780091656"},{"product_id":"5-5-mm-ball-end-hex-l-key","title":"5.5 mm Ball End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-Keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51555640574237,"sku":"TT-KLX82055","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/cr5curmncf8tnfjysg1i.jpg?v=1780091715"},{"product_id":"3-16-inch-ball-end-hex-l-key","title":"3\/16 Inch Ball End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-Keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51555643851037,"sku":"TT-KLX72188","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/alhmjz4b6vprwuzajm1k.jpg?v=1780091716"},{"product_id":"short-arm-ball-end-hex-l-key-set-with-holder-13-piece-0-050-3-8-in","title":"Short Arm Ball End Hex L-Key Set with Holder, 13-Piece (0.050 - 3\/8 in.)","description":"\u003cp\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Quick-Access Holder – We designed our holder to organize the L-keys facing forward so you can easily access each tool without having to move others out of the way • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton's short arm L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51555756802333,"sku":"TT-KLX91112","price":34.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/u2vwtppxu3cy7s4vqtux.jpg?v=1780091835"},{"product_id":"5-mm-flat-end-hex-l-key","title":"5 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51555757523229,"sku":"TT-KLX22050","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/mtzv3luhc5paxuas6lim.jpg?v=1780091836"},{"product_id":"9-64-inch-flat-end-hex-l-key","title":"9\/64 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51555860021533,"sku":"TT-KLX12141","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/dqkqmlshul1qejekj7ne.jpg?v=1780091947"},{"product_id":"t30-star-t-handle-key","title":"T30 Star T-Handle Key","description":"\u003cp\u003e• Side Drive – In addition to the long arm, the T-handle keys have a short side drive that's ideal for breaking loose fasteners • Large, Comfortable Handle – The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Clear Markings – Each key is marked with a large, painted inset marking on the handle that's highly visible and won't wear off • Corrosion-Resistant – The T-handle keys are finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton T-handle keys have two ends—both a star long arm for spinning out fasteners, as well as a short, star side drive for breaking loose fasteners. The large, contoured handle is designed to comfortably fit your in your hand as you apply torque from various positions. The steel key is made from 8660 nickel chromium molybdenum steel and held to high tolerance standards so you can count on a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51555931128093,"sku":"TT-KTT32300","price":21.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/d7nhnx3gutspoyy831xe.jpg?v=1780092018"},{"product_id":"star-t-handle-key-set-with-stand-13-piece-t6-t50","title":"Star T-Handle Key Set with Stand, 13-Piece (T6 - T50)","description":"\u003cp\u003e• Side Drive – In addition to the long arm, the T-handle keys have a short side drive that's ideal for breaking loose fasteners • Large, Comfortable Handle – The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions • 18 Gauge Steel Stand – Our custom T-handle benchtop stand is designed to guide each key into its slot, making it easy to store and retrieve your tools • Precise Tip Geometry– The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Clear Markings – Each key is marked with a large, painted inset marking on the handle that's highly visible and won't wear off\u003cbr\u003eTekton T-handle keys have two ends—both a star long arm for spinning out fasteners, as well as a short, star side drive for breaking loose fasteners. The large, contoured handle is designed to comfortably fit your in your hand as you apply torque from various positions. The steel key is made from 8660 nickel chromium molybdenum steel and held to high tolerance standards so you can count on a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556030578973,"sku":"TT-KTT92401","price":91.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/yxt62rfmg4zilxmpscoj.jpg?v=1780092148"},{"product_id":"4-5-mm-flat-end-hex-l-key","title":"4.5 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556200481053,"sku":"TT-KLX22045","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/j8eoms2rquku3ktbs85h.jpg?v=1780092377"},{"product_id":"10-mm-flat-end-hex-l-key","title":"10 mm Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways—both with a high-visibility laser marking and a stamped marking. Tekton keys also have slightly chamfered edges (except the sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556219322653,"sku":"TT-KLX22100","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/kk2jj01fsob3m7l5ip8n.jpg?v=1780092392"},{"product_id":"flat-end-hex-l-key-set-with-racks-15-piece-7-16-3-4-in-11-19-mm","title":"Flat End Hex L-Key Set with Racks, 15-Piece (7\/16-3\/4 in., 11-19 mm)","description":"\u003cp\u003e• High Leverage – We designed these L-keys to be longer to increase leverage when it matters\n  • Two Measures of Tolerance Control – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency\n  • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44–50 HRC to produce tools that are hard, but not brittle\n  • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n  • Clear Markings – Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking\u003cbr\u003eThe Tekton 15-Piece Hex L-Key Set includes 7\/16–3\/4 inch and 11–19 mm L-keys with hex key racks. The L-keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC and coated with a durable manganese phosphate finish that's resistant to corrosion. We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. The L-key sizes are marked with a high-visibility laser marking and a stamped marking. In the included racks, the keys rest in hex-shaped slots, making it easy to take the tools in and out without resistance. Each slot in the rack is made to fit a specific L-key size. The handles on either side of the racks make it easy to lift out of a drawer. The racks are made from 12 gauge steel with a textured powder-coat finish and include size label sheets.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556258709789,"sku":"TT-KLX92301","price":206.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/rhmugqrnryvdxgemoriu.jpg?v=1780092443"},{"product_id":"4-mm-flat-end-hex-t-handle-key","title":"4 mm Flat End Hex T-Handle Key","description":"\u003cp\u003e• Molded Handle and Steel Key – Our T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable\n • 8660 Steel – Our T-handle keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – The size is marked in three ways: with a high-visibility laser marking, a stamped marking, and a painted inset marking that can't wear off\u003cbr\u003eTekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton T-handle keys have slightly chamfered edges and a smooth top face to optimize engagement with fasteners. We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion. The size is marked in three ways: with a high-visibility laser marking, a stamped marking, and a painted inset marking that can't wear off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556384538909,"sku":"TT-KTX32040","price":15.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/szym8nctftqertlkra0j.jpg?v=1780092574"},{"product_id":"flat-end-hex-l-key-set-with-rack-9-piece-11-19-mm","title":"Flat End Hex L-Key Set with Rack, 9-Piece (11-19 mm)","description":"\u003cp\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44–50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking • Quick-Access Rack – The included rack has hex-shaped slots that make it easy to take the tools in and out without resistance\u003cbr\u003eThe Tekton 9-Piece Hex L-Key Set includes 11–19 mm hex L-keys and a 9-tool hex key rack. The L-keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC and coated with a durable manganese phosphate finish that's resistant to corrosion. The L-key sizes are marked with a high-visibility laser marking and a stamped marking. In the included rack, the keys rest in hex-shaped slots, making it easy to take the tools in and out without resistance. Each slot in the rack is made to fit a specific L-key size. Handles on either side of the rack make it easy to lift out of a drawer. The rack is made from 12 gauge steel with a textured powder-coat finish and includes a sheet of size labels.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556384801053,"sku":"TT-KLX92201","price":129.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/vva2rqkwftbclwahihxe.jpg?v=1780092573"},{"product_id":"9-64-inch-ball-end-hex-l-key","title":"9\/64 Inch Ball End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-Keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556560896285,"sku":"TT-KLX72141","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/igxxt57uodmginuevunb.jpg?v=1780092760"},{"product_id":"flat-end-hex-t-handle-key-set-11-piece-5-64-3-8-in","title":"Flat End Hex T-Handle Key Set, 11-Piece (5\/64 - 3\/8 in.)","description":"\u003cp\u003e• Molded Handle and Steel Key – Our T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable\n • 8660 Steel – Our T-handle keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton T-handle sizes are marked in three ways: with a high-visibility laser marking, a stamped marking, and a painted inset marking that can't wear off\u003cbr\u003eTekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton T-handle keys have slightly chamfered edges and a smooth top face to optimize engagement with fasteners. We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion. The size is marked in three ways: with a high-visibility laser marking, a stamped marking (except the 5\/64 in. key, which is too small to stamp), and a painted inset marking that can't wear off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51557757583645,"sku":"TT-KTX90102","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/otoihfhrcscuw3z048ex.jpg?v=1780094120"},{"product_id":"5-64-inch-flat-end-hex-l-key","title":"5\/64 Inch Flat End Hex L-Key","description":"\u003cp\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. The key tolerances are measured in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. The size is marked with a high-visibility laser marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51557921521949,"sku":"TT-KLX12078","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/nk3rxfxkjp64vglhegpu.jpg?v=1780094297"},{"product_id":"1-8-inch-ball-end-hex-l-key","title":"1\/8 Inch Ball End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-Keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51557976441117,"sku":"TT-KLX72125","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/bhffzgl6tqlafqtkidli.jpg?v=1780094357"},{"product_id":"9-mm-flat-end-hex-t-handle-key","title":"9 mm Flat End Hex T-Handle Key","description":"\u003cp\u003e• Molded Handle and Steel Key – Our T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable\n • 8660 Steel – Our T-handle keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle\n • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency\n • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion\n • Clear Markings – The size is marked in three ways: with a high-visibility laser marking, a stamped marking, and a painted inset marking that can't wear off\u003cbr\u003eTekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions. We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners. We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. With the exception of the smallest sizes, Tekton T-handle keys have slightly chamfered edges and a smooth top face to optimize engagement with fasteners. We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion. The size is marked in three ways: with a high-visibility laser marking, a stamped marking, and a painted inset marking that can't wear off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558140576029,"sku":"TT-KTX32090","price":21.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/sq2e4aiqpnftefgbya3r.jpg?v=1780094540"},{"product_id":"5-16-inch-ball-end-hex-t-handle-key","title":"5\/16 Inch Ball End Hex T-Handle Key","description":"\u003cp\u003e• Side Drive – In addition to the ball-end long arm, the T-handle keys have a flat-end side drive that's ideal for breaking loose fasteners • Large, Comfortable Handle – The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Clear Markings – Each key is marked with a large, painted inset marking on the handle that's highly visible and won't wear off • Corrosion-Resistant – The T-handle keys are finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton T-handle keys have two ends—both a ball-end long arm for spinning out fasteners, as well as a short, flat-end side drive for breaking loose fasteners. The large, contoured handle is designed to comfortably fit your in your hand as you apply torque from various positions. The steel key is made from 8660 nickel chromium molybdenum steel and held to high tolerance standards so you can count on a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558140805405,"sku":"TT-KTX37313","price":21.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ilw67zult0ze5hz1hcp5.jpg?v=1780094540"},{"product_id":"3-8-inch-short-arm-ball-end-hex-l-key","title":"3\/8 Inch Short Arm Ball End Hex L-Key","description":"\u003cp\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton's short arm L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558151618845,"sku":"TT-KLX77375","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/vfosgcnrn3t0yoeqc58d.jpg?v=1780094548"},{"product_id":"t27-star-t-handle-key","title":"T27 Star T-Handle Key","description":"\u003cp\u003e• Side Drive – In addition to the long arm, the T-handle keys have a short side drive that's ideal for breaking loose fasteners • Large, Comfortable Handle – The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Clear Markings – Each key is marked with a large, painted inset marking on the handle that's highly visible and won't wear off • Corrosion-Resistant – The T-handle keys are finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton T-handle keys have two ends—both a star long arm for spinning out fasteners, as well as a short, star side drive for breaking loose fasteners. The large, contoured handle is designed to comfortably fit your in your hand as you apply torque from various positions. The steel key is made from 8660 nickel chromium molybdenum steel and held to high tolerance standards so you can count on a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558155387165,"sku":"TT-KTT32270","price":19.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/be46b8jybkx5bvy06nxz.jpg?v=1780094553"},{"product_id":"t40-star-l-key","title":"T40 Star L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking\u003cbr\u003eTekton L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558167576861,"sku":"TT-KLT22400","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/rl5wlf34whpwn1i4r4sd.jpg?v=1780094606"},{"product_id":"7-32-inch-short-arm-ball-end-hex-l-key","title":"7\/32 Inch Short Arm Ball End Hex L-Key","description":"\u003cp\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton's short arm L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558402195741,"sku":"TT-KLX77219","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/pam4a3vdgm166owmylpg.jpg?v=1780094856"},{"product_id":"3-5-mm-short-arm-ball-end-hex-l-key","title":"3.5 mm Short Arm Ball End Hex L-Key","description":"\u003cp\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton's short arm L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558558171421,"sku":"TT-KLX87035","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/rven3i0r2gy6uf2ynbgi.jpg?v=1780095037"},{"product_id":"9-mm-ball-end-hex-l-key","title":"9 mm Ball End Hex L-Key","description":"\u003cp\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)\u003cbr\u003eTekton L-Keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558662603037,"sku":"TT-KLX82090","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/hmsw777hcl0ohw2g5liy.jpg?v=1780095156"},{"product_id":"9-mm-ball-end-hex-t-handle-key","title":"9 mm Ball End Hex T-Handle Key","description":"\u003cp\u003e• Side Drive – In addition to the ball-end long arm, the T-handle keys have a flat-end side drive that's ideal for breaking loose fasteners • Large, Comfortable Handle – The handle's large, contoured shape is designed to fit your hand and make it comfortable to spin the tool and apply torque from various positions • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Clear Markings – Each key is marked with a large, painted inset marking on the handle that's highly visible and won't wear off • Corrosion-Resistant – The T-handle keys are finished with a manganese phosphate coating that's highly resistant to corrosion\u003cbr\u003eTekton T-handle keys have two ends—both a ball-end long arm for spinning out fasteners, as well as a short, flat-end side drive for breaking loose fasteners. The large, contoured handle is designed to comfortably fit your in your hand as you apply torque from various positions. The steel key is made from 8660 nickel chromium molybdenum steel and held to high tolerance standards so you can count on a proper, snug fit every time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558760743197,"sku":"TT-KTX38090","price":21.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/mtqtwnygvcnrtppd7sbe.jpg?v=1780095274"}],"url":"https:\/\/industrialwarehouse.com\/collections\/tekton-hex-keys.oembed","provider":"Industrial Warehouse","version":"1.0","type":"link"}