{"title":"Tekton Locking Pliers","description":"","products":[{"product_id":"locking-pliers-and-c-clamp-set-10-piece","title":"Locking Pliers and C-Clamp Set (10-Piece)","description":"\u003cp\u003e• Straight Jaw Profile – Wide and relatively short jaws clamp flat stock, L-angle, and sheet metal for welding or assembly; deep, sharp, regularly spaced teeth offer an evenly distributed grip on smooth, flat surfaces\n • Curved Jaw Profile – The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth\n • Long Nose Profile – Designed to reach into tight spaces, the long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly\n • C-Clamp Jaws – Fixed points apply direct pressure to clamped surfaces, secure small parts, and allow access to tight spaces where a swivel pad won't fit\n • Pull-to-Release Lever – Easily set, release, and reposition the tool with one hand and with more control than a traditional pinch-style lever\u003cbr\u003eTekton locking pliers and C-clamps are ideal for clamping and holding together a variety of materials, including flat stock, L-angle, and sheet metal. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. The adjustment knob is knurled and round to provide grip for making adjustments even when you're wearing gloves or have slippery hands. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. Clamping force at the jaws directly depends on the strength and integrity of the clamp's three main rivets, which together make up the 4-point mechanical structure of the clamp. To make sure ours can withstand high shear forces, these rivets are made from tough 4135 chrome molybdenum steel. Before assembly, the individual jaw, handle, lever, and crossbar parts are shot-peened to create smooth, consistent surfaces. The final finish is a durable nickel plating that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51557925814557,"sku":"TT-PLK99907","price":146.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/hiacg45ewg8mfuvo0tls.jpg?v=1780094303"},{"product_id":"locking-pliers-set-with-rack-10-piece","title":"Locking Pliers Set with Rack (10-Piece)","description":"\u003cp\u003e• Straight Jaw Profile – Wide and relatively short jaws clamp flat stock, L-angle, and sheet metal for welding or assembly; deep, sharp, regularly spaced teeth offer an evenly distributed grip on smooth, flat surfaces\n • Curved Jaw Profile – The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth\n • Long Nose Profile – Designed to reach into tight spaces, the long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly\n • Deep Bite Round Jaw Profile – The jaws are designed to encircle pipes, round fittings, and hex nuts, and dig in with sharp teeth set at opposing angles\n • Organizer Rack – Keep pliers upright and organized, making them easy to grab, and saving space in toolbox drawers or on tabletop surfaces\u003cbr\u003eTekton straight jaw locking pliers have wide and relatively short jaws that clamp and hold flat stock, L-angle, and sheet metal in position for welding or assembly. Deep, sharp, regularly spaced teeth offer an evenly distributed grip on smooth, flat surfaces. Long nose locking pliers are designed to reach into tight spaces. Curved jaw pliers have a section of the jaw that locks onto hex-shaped bolts, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion. The 10-tool pliers organizer rack keeps pliers upright and organized, making them easy to grab, and saving space in toolbox drawers or on tabletop surfaces.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51558960464157,"sku":"TT-PLK99904","price":142.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/wrvzxnrlxnnkz5hvt9dq.jpg?v=1780095535"},{"product_id":"straight-jaw-locking-pliers-set-3-piece","title":"Straight Jaw Locking Pliers Set (3-Piece)","description":"\u003cp\u003e• Straight Jaw Profile – Wide and relatively short jaws clamp and hold flat stock, L-angle, and sheet metal in position for welding or assembly\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\n • Strong Jaws – The jaws of the locking pliers, clamps, and C-clamps are made from chromium vanadium or chromium molybdenum steel alloys\u003cbr\u003eTekton straight jaw locking pliers have wide and relatively short jaws that clamp and hold flat stock, L-angle, and sheet metal in position for welding or assembly. Deep, sharp, regularly spaced teeth offer an evenly distributed grip on smooth, flat surfaces. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51559420428573,"sku":"TT-PLK90004","price":52.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/pdkgearwbbt9xbbmwqug.jpg?v=1780096081"},{"product_id":"locking-pliers-set-6-piece-straight-jaw-curved-jaw-long-nose","title":"Locking Pliers Set, 6-Piece (Straight Jaw, Curved Jaw, Long Nose)","description":"\u003cp\u003e• Straight Jaw Profile – Wide and relatively short jaws clamp flat stock, L-angle, and sheet metal for welding or assembly; deep, sharp, regularly spaced teeth offer an evenly distributed grip on smooth, flat surfaces\n • Curved Jaw Profile – The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth\n • Long Nose Profile – Designed to reach into tight spaces, the long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\u003cbr\u003eTekton straight jaw locking pliers have wide and relatively short jaws that clamp and hold flat stock, L-angle, and sheet metal in position for welding or assembly. Deep, sharp, regularly spaced teeth offer an evenly distributed grip on smooth, flat surfaces. Long nose locking pliers are designed to reach into tight spaces. Curved jaw pliers have a section of the jaw that locks onto hex-shaped bolts, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51561265496349,"sku":"TT-PLK99903","price":89.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/eb0bd3efdae96479180ba7896502ad7243b7a9a0.jpg?v=1780098411"},{"product_id":"long-nose-locking-pliers-set-2-piece","title":"Long Nose Locking Pliers Set (2-Piece)","description":"\u003cp\u003e• Long Nose Jaws – Designed to reach into tight spaces, the long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly\n • Deep, Sharp Teeth – The curved section locks onto smaller hex, round, and square-shaped pieces with the aggressive bite of deep, sharp teeth\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\u003cbr\u003eTekton long nose locking pliers are designed to reach into tight spaces. The long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly. Its shallow, regularly spaced teeth provide an evenly distributed grip on smooth, flat surfaces. The curved section locks onto smaller hex, round, and square-shaped pieces with the aggressive bite of deep, sharp teeth. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51561891004701,"sku":"TT-PLK90303","price":36.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/dcnlahl8brhmqyxdkarr.jpg?v=1780099196"},{"product_id":"7-inch-deep-bite-round-jaw-locking-pliers","title":"7 Inch Deep Bite Round Jaw Locking Pliers","description":"\u003cp\u003e• Deep Bite Round Jaw – The jaws are designed to encircle pipes, round fittings, and hex nuts, and dig in with sharp teeth set at opposing angles\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\n • Strong Jaws and Teeth – The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance; the teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9\u003cbr\u003eTekton deep bite round jaw pliers are designed to encircle pipes, round fittings, and hex nuts, and dig in with sharp teeth set at opposing angles. As the pliers close, the bottom jaw shifts forward, setting the teeth into a strong directional bite, creating even higher clamping pressure. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562047832349,"sku":"TT-PLK20007","price":24.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/te9dnhx0ylc7zn9zhv06.jpg?v=1780099399"},{"product_id":"7-inch-straight-jaw-locking-pliers","title":"7 Inch Straight Jaw Locking Pliers","description":"\u003cp\u003e• Straight Jaw Profile – Wide and relatively short jaws clamp and hold flat stock, L-angle, and sheet metal in position for welding or assembly\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\n • Strong Jaws and Teeth – The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance; the teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9\u003cbr\u003eTekton straight jaw locking pliers have wide and relatively short jaws that clamp and hold flat stock, L-angle, and sheet metal in position for welding or assembly. Deep, sharp, regularly-spaced teeth offer an evenly distributed grip on smooth, flat surfaces. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562085875997,"sku":"TT-PLK00007","price":23.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ra7quko8jxsmg6inlfqg.jpg?v=1780099441"},{"product_id":"locking-pliers-set-2-piece-curved-jaw-long-nose","title":"Locking Pliers Set, 2-Piece (Curved Jaw, Long Nose)","description":"\u003cp\u003e• Curved Jaw Profile – The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth\n • Long Nose Jaws – Designed to reach into tight spaces, the long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\u003cbr\u003eTekton long nose locking pliers are designed to reach into tight spaces. The long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly. Curved jaw pliers have a section of the jaw that locks onto hex-shaped bolts, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562240246045,"sku":"TT-PLK99901","price":46.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/kgqb3vc467hw7flwpegs.jpg?v=1780099636"},{"product_id":"locking-pliers-and-swivel-c-clamp-set-10-piece","title":"Locking Pliers and Swivel C-Clamp Set (10-Piece)","description":"\u003cp\u003e• Straight Jaw Profile – Wide and relatively short jaws clamp flat stock, L-angle, and sheet metal for welding or assembly; deep, sharp, regularly spaced teeth offer an evenly distributed grip on smooth, flat surfaces\n • Curved Jaw Profile – The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth\n • Long Nose Profile – Designed to reach into tight spaces, the long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly\n • Swivel Pad C-Clamp Jaws – Swivel pads provide more surface contact than fixed points, offering a more secure and gentler hold for a variety of materials, including those with soft or uneven surfaces\n • Pull-to-Release Lever – Easily set, release, and reposition the tool with one hand and with more control than a traditional pinch-style lever\u003cbr\u003eTekton locking pliers and swivel pad C-clamps are ideal for clamping and holding together a variety of materials, including those with soft or uneven surfaces. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. The adjustment knob is knurled and round to provide grip for making adjustments even when you're wearing gloves or have slippery hands. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. Clamping force at the jaws directly depends on the strength and integrity of the clamp's three main rivets, which together make up the 4-point mechanical structure of the clamp. To make sure ours can withstand high shear forces, these rivets are made from tough 4135 chrome molybdenum steel. Before assembly, the individual jaw, handle, lever, and crossbar parts are shot-peened to create smooth, consistent surfaces. The final finish is a durable nickel plating that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562413687069,"sku":"TT-PLK99908","price":146.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/tk6f3nix5gw0nz17qv0f.jpg?v=1780099882"},{"product_id":"locking-pliers-and-swivel-c-clamp-set-6-piece","title":"Locking Pliers and Swivel C-Clamp Set (6-Piece)","description":"\u003cp\u003e• Straight Jaw Profile – Wide and relatively short jaws clamp flat stock, L-angle, and sheet metal for welding or assembly; deep, sharp, regularly spaced teeth offer an evenly distributed grip on smooth, flat surfaces\n • Curved Jaw Profile – The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth\n • Long Nose Profile – Designed to reach into tight spaces, the long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly\n • Swivel Pad C-Clamp Jaws – Swivel pads provide more surface contact than fixed points, offering a more secure and gentler hold for a variety of materials, including those with soft or uneven surfaces\n • Pull-to-Release Lever – Easily set, release, and reposition the tool with one hand and with more control than a traditional pinch-style lever\u003cbr\u003eTekton locking pliers and swivel pad C-clamps are ideal for clamping and holding together a variety of materials, including those with soft or uneven surfaces. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. The adjustment knob is knurled and round to provide grip for making adjustments even when you're wearing gloves or have slippery hands. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. Clamping force at the jaws directly depends on the strength and integrity of the clamp's three main rivets, which together make up the 4-point mechanical structure of the clamps. To make sure ours can withstand high shear forces, these rivets are made from tough 4135 chrome molybdenum steel. Before assembly, the individual jaw, handle, lever, and crossbar parts are shot-peened to create smooth, consistent surfaces. The final finish is a durable nickel plating that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562503766301,"sku":"TT-PLK99906","price":101.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ipz3esvc5hgo5cijjkok.jpg?v=1780099994"},{"product_id":"locking-pliers-set-4-piece-straight-jaw-curved-jaw-long-nose","title":"Locking Pliers Set, 4-Piece (Straight Jaw, Curved Jaw, Long Nose)","description":"\u003cp\u003e• Straight Jaw Profile – Wide and relatively short jaws clamp flat stock, L-angle, and sheet metal for welding or assembly; deep, sharp, regularly spaced teeth offer an evenly distributed grip on smooth, flat surfaces\n • Curved Jaw Profile – The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth\n • Long Nose Profile – Designed to reach into tight spaces, the long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\u003cbr\u003eTekton straight jaw locking pliers have wide and relatively short jaws that clamp and hold flat stock, L-angle, and sheet metal in position for welding or assembly. Deep, sharp, regularly spaced teeth offer an evenly distributed grip on smooth, flat surfaces. Long nose locking pliers are designed to reach into tight spaces. Curved jaw pliers have a section of the jaw that locks onto hex-shaped bolts, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562511728925,"sku":"TT-PLK99902","price":67.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ae2josb2jpyejloypknm.jpg?v=1780100010"},{"product_id":"7-inch-curved-jaw-locking-pliers","title":"7 Inch Curved Jaw Locking Pliers","description":"\u003cp\u003e• Curved Jaw Profile – The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\n • Strong Jaws and Teeth – The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance; the teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9\u003cbr\u003eTekton curved jaw pliers have a curved section that locks onto hex-shaped bolts, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562592862493,"sku":"TT-PLK10007","price":23.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ykkr91pedddudkexyhz8.jpg?v=1780100124"},{"product_id":"5-inch-curved-jaw-locking-pliers","title":"5 Inch Curved Jaw Locking Pliers","description":"\u003cp\u003e• Curved Jaw Profile – The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\n • Strong Jaws and Teeth – The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance; the teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9\u003cbr\u003eTekton curved jaw pliers have a curved section that locks onto hex-shaped bolts, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562821419293,"sku":"TT-PLK10005","price":21.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/gqrffehcwc7eq5c4ohnn.jpg?v=1780100428"},{"product_id":"10-inch-curved-jaw-locking-pliers","title":"10 Inch Curved Jaw Locking Pliers","description":"\u003cp\u003e• Curved Jaw Profile – The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\n • Strong Jaws and Teeth – The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance; the teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9\u003cbr\u003eTekton curved jaw pliers have a curved section that locks onto hex-shaped bolts, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562824892701,"sku":"TT-PLK10010","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/yyagznykcon5ozfyyqb6.jpg?v=1780100432"},{"product_id":"locking-pliers-and-c-clamp-set-6-piece","title":"Locking Pliers and C-Clamp Set (6-Piece)","description":"\u003cp\u003e• Straight Jaw Profile – Wide and relatively short jaws clamp flat stock, L-angle, and sheet metal for welding or assembly; deep, sharp, regularly spaced teeth offer an evenly distributed grip on smooth, flat surfaces\n • Curved Jaw Profile – The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth\n • Long Nose Profile – Designed to reach into tight spaces, the long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly\n • C-Clamp Jaws – Fixed points apply direct pressure to clamped surfaces, secure small parts, and allow access to tight spaces where a swivel pad won't fit\n • Pull-to-Release Lever – Easily set, release, and reposition the tool with one hand and with more control than a traditional pinch-style lever\u003cbr\u003eTekton locking pliers and C-clamps are ideal for clamping and holding together a variety of materials including flat stock, L-angle, and sheet metal. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. The adjustment knob is knurled and round to provide grip for making adjustments even when you're wearing gloves or have slippery hands. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. Clamping force at the jaws directly depends on the strength and integrity of the clamp's three main rivets, which together make up the 4-point mechanical structure of the clamps. To make sure ours can withstand high shear forces, these rivets are made from tough 4135 chrome molybdenum steel. Before assembly, the individual jaw, handle, lever, and crossbar parts are shot-peened to create smooth, consistent surfaces. The final finish is a durable nickel plating that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51562878927133,"sku":"TT-PLK99905","price":101.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/o9riarttd8uy36zx524x.jpg?v=1780100498"},{"product_id":"10-inch-deep-bite-round-jaw-locking-pliers","title":"10 Inch Deep Bite Round Jaw Locking Pliers","description":"\u003cp\u003e• Deep Bite Round Jaw – The jaws are designed to encircle pipes, round fittings, and hex nuts, and dig in with sharp teeth set at opposing angles\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\n • Strong Jaws and Teeth – The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance; the teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9\u003cbr\u003eTekton deep bite round jaw pliers are designed to encircle pipes, round fittings, and hex nuts, and dig in with sharp teeth set at opposing angles. As the pliers close, the bottom jaw shifts forward, setting the teeth into a strong directional bite, creating even higher clamping pressure. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51563094311197,"sku":"TT-PLK20010","price":26.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/aavez5doh7mmsdopfqf5.jpg?v=1780100790"},{"product_id":"6-inch-long-nose-locking-pliers","title":"6 Inch Long Nose Locking Pliers","description":"\u003cp\u003e• Long Nose Jaws – Designed to reach into tight spaces, the long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly\n • Deep, Sharp Teeth – The curved section locks onto smaller hex, round, and square-shaped pieces with the aggressive bite of deep, sharp teeth\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\u003cbr\u003eTekton long nose locking pliers are designed to reach into tight spaces. The long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly. Its shallow, regularly-spaced teeth provide an evenly distributed grip on smooth, flat surfaces. The curved section locks onto smaller hex, round, and square-shaped pieces with the aggressive bite of deep, sharp teeth. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51563536810269,"sku":"TT-PLK30006","price":23.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/rpbhfexgygpvejvtsuoq.jpg?v=1780101225"},{"product_id":"10-inch-straight-jaw-locking-pliers","title":"10 Inch Straight Jaw Locking Pliers","description":"\u003cp\u003e• Straight Jaw Profile – Wide and relatively short jaws clamp and hold flat stock, L-angle, and sheet metal in position for welding or assembly\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\n • Strong Jaws and Teeth – The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance; the teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9\u003cbr\u003eTekton straight jaw locking pliers have wide and relatively short jaws that clamp and hold flat stock, L-angle, and sheet metal in position for welding or assembly. Deep, sharp, regularly-spaced teeth offer an evenly distributed grip on smooth, flat surfaces. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51563854758173,"sku":"TT-PLK00010","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/q8j7x7vmk8lhzspaoqoz.jpg?v=1780101661"},{"product_id":"5-inch-straight-jaw-locking-pliers","title":"5 Inch Straight Jaw Locking Pliers","description":"\u003cp\u003e• Straight Jaw Profile – Wide and relatively short jaws clamp and hold flat stock, L-angle, and sheet metal in position for welding or assembly\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\n • Strong Jaws and Teeth – The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance; the teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9\u003cbr\u003eTekton straight jaw locking pliers have wide and relatively short jaws that clamp and hold flat stock, L-angle, and sheet metal in position for welding or assembly. Deep, sharp, regularly-spaced teeth offer an evenly distributed grip on smooth, flat surfaces. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51565462421789,"sku":"TT-PLK00005","price":21.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/lzsisjbe9ryeuiglmzjf.jpg?v=1780103795"},{"product_id":"9-inch-long-nose-locking-pliers","title":"9 Inch Long Nose Locking Pliers","description":"\u003cp\u003e• Long Nose Jaws – Designed to reach into tight spaces, the long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly\n • Deep, Sharp Teeth – The curved section locks onto smaller hex, round, and square-shaped pieces with the aggressive bite of deep, sharp teeth\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\u003cbr\u003eTekton long nose locking pliers are designed to reach into tight spaces. The long, tapered straight section clamps flat stock, L-angle, and sheet metal in position for welding or assembly. Its shallow, regularly-spaced teeth provide an evenly distributed grip on smooth, flat surfaces. The curved section locks onto smaller hex, round, and square-shaped pieces with the aggressive bite of deep, sharp teeth. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51565784826141,"sku":"TT-PLK30009","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/qrfajnujufn2aeueapw2.jpg?v=1780104169"},{"product_id":"deep-bite-round-jaw-locking-pliers-set-2-piece","title":"Deep Bite Round Jaw Locking Pliers Set (2-Piece)","description":"\u003cp\u003e• Round jaw profile holds round, hex, and square shapes • Unique indexing jaw shifts forward as it closes, creating extremely high clamping pressure that won't slip, even on smooth surfaces • Strong chrome molybdenum jaws with sharp, angled teeth offer a sure, directional bite like a pipe wrench • Pull-type release lever works like a trigger for controlled one-handed operation and fast repositioning • Generously sized tension adjustment knob offers a large, nonslip knurled surface and a through hole for added leverage with a second tool\u003cbr\u003eIncludes: 7 and 10 inch deep bite round jaw locking pliers. The handle allows for one-hand pull release. With a curved jaw that grips round, hex, square, flat stock, sheet metal. Item #PLK90201\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51566295744797,"sku":"TT-PLK90201","price":46.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/mrc9g768e7jt1h52b3kg.jpg?v=1780104830"},{"product_id":"curved-jaw-locking-pliers-set-3-piece","title":"Curved Jaw Locking Pliers Set (3-Piece)","description":"\u003cp\u003e• Curved Jaw Profile – The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth\n • Strong Jaws and Teeth – The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance; the teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9\n • Pull-to-Release Lever – Easily set, release, and reposition the pliers with one hand and with more control than a traditional pinch-style lever\n • Large Adjustment Knob – The adjustment knob is knurled and round to provide grip for making adjustments even when you’re wearing gloves or have slippery hands\n • Tensioning Through-Hole – Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle\u003cbr\u003eTekton curved jaw pliers have a curved section of the jaw that locks onto hex-shaped bolts, rounded-off nuts, pipes, and square tubing with the aggressive bite of deep, sharp teeth. Easily set, release, and reposition the clamp with one hand and with more control than a traditional pinch-style lever. Get extra leverage and fine-tune your clamping force by inserting a screwdriver or hex key into the through-hole to create a T-handle. The jaws are made from 4140 chromium molybdenum steel, an alloy that offers toughness, machinability, and corrosion resistance. The teeth are hardened to 45–50 HRC and should not chip or strip even on fasteners up to Grade 8 or Class 12.9. The pliers have a durable, nickel-plated finish that protects against corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51566359675165,"sku":"TT-PLK90104","price":52.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/fjzdcxpoc4bgkl1rxsvd.jpg?v=1780104907"}],"url":"https:\/\/industrialwarehouse.com\/collections\/tekton-locking-pliers.oembed","provider":"Industrial Warehouse","version":"1.0","type":"link"}