{"title":"Tekton Wrenches","description":"","products":[{"product_id":"5-16-inch-angle-head-open-end-wrench","title":"5\/16 Inch Angle Head Open End Wrench","description":"\u003cp\u003e• Best Combination of Angles – We paired 30 and 60 degree angled heads to achieve greater coverage with fewer blind spots in limited access situations\n • Beam Position Improves Performance – To achieve the greatest range of motion in confined spaces, we shifted the wrench beam the maximum distance up and out of the way and reduced the radius where it meets the wrench head\n • Clear Size Markings – The wrench sizes are laser engraved onto both sides of each angle wrench with a large, permanent marking that's easy to read\n • Chamfered Handle – Except for the smallest sizes, the edges of the wrench beam are chamfered to provide a smooth, comfortable grip for your hands\n • Satin Finish – Our angle wrenches are made from 4140 chromium-molybdenum steel that's hardened to 50–53 HRC and abrasive-blasted for a finely textured finish\n • Michigan Manufacturing – Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility\u003cbr\u003eTekton Angle Head Open End Wrenches allow you to progressively turn fasteners and fittings in confined spaces, saving you time because you can continue to work without disconnecting or dismantling equipment to access hard-to-reach areas. The 30 and 60 degree angled heads provide greater coverage with fewer blind spots in limited access situations, and the beam is shifted up and out of the way to achieve the greatest range of motion in confined spaces. The shape of the head is also optimized for access and strength while also preventing jaw spread. We make our angle wrenches from 4140 chromium-molybdenum steel and harden them to 50–53 HRC. The wrenches are abrasive-blasted to create a finely textured satin finish and then plated with corrosion-resistant nickel. The wrenches have laser-engraved size markings and (with the exception of the smallest wrench sizes) chamfered handles. Our angle wrenches are manufactured entirely in the USA with USA-made materials. Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556746395933,"sku":"TT-WAE83208","price":20.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/gi5rikbaya4ifwlb87bl.jpg?v=1780092969"},{"product_id":"28-mm-angle-head-open-end-wrench","title":"28 mm Angle Head Open End Wrench","description":"\u003cp\u003e• Best Combination of Angles – We paired 30 and 60 degree angled heads to achieve greater coverage with fewer blind spots in limited access situations\n • Beam Position Improves Performance – To achieve the greatest range of motion in confined spaces, we shifted the wrench beam the maximum distance up and out of the way and reduced the radius where it meets the wrench head\n • Clear Size Markings – The wrench sizes are laser engraved onto both sides of each angle wrench with a large, permanent marking that's easy to read\n • Chamfered Handle – Except for the smallest sizes, the edges of the wrench beam are chamfered to provide a smooth, comfortable grip for your hands\n • Satin Finish – Our angle wrenches are made from 4140 chromium-molybdenum steel that's hardened to 50–53 HRC and abrasive-blasted for a finely textured finish\n • Michigan Manufacturing – Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility\u003cbr\u003eTekton Angle Head Open End Wrenches allow you to progressively turn fasteners and fittings in confined spaces, saving you time because you can continue to work without disconnecting or dismantling equipment to access hard-to-reach areas. The 30 and 60 degree angled heads provide greater coverage with fewer blind spots in limited access situations, and the beam is shifted up and out of the way to achieve the greatest range of motion in confined spaces. The shape of the head is also optimized for access and strength while also preventing jaw spread. We make our angle wrenches from 4140 chromium-molybdenum steel and harden them to 50–53 HRC. The wrenches are abrasive-blasted to create a finely textured satin finish and then plated with corrosion-resistant nickel. The wrenches have laser-engraved size markings and (with the exception of the smallest wrench sizes) chamfered handles. Our angle wrenches are manufactured entirely in the USA with USA-made materials. Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556756979997,"sku":"TT-WAE84228","price":48.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/irsfrxy5nq34qknndtkf.jpg?v=1780092997"},{"product_id":"11-mm-angle-head-open-end-wrench","title":"11 mm Angle Head Open End Wrench","description":"\u003cp\u003e• Best Combination of Angles – We paired 30 and 60 degree angled heads to achieve greater coverage with fewer blind spots in limited access situations\n • Beam Position Improves Performance – To achieve the greatest range of motion in confined spaces, we shifted the wrench beam the maximum distance up and out of the way and reduced the radius where it meets the wrench head\n • Clear Size Markings – The wrench sizes are laser engraved onto both sides of each angle wrench with a large, permanent marking that's easy to read\n • Chamfered Handle – Except for the smallest sizes, the edges of the wrench beam are chamfered to provide a smooth, comfortable grip for your hands\n • Satin Finish – Our angle wrenches are made from 4140 chromium-molybdenum steel that's hardened to 50–53 HRC and abrasive-blasted for a finely textured finish\n • Michigan Manufacturing – Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility\u003cbr\u003eTekton Angle Head Open End Wrenches allow you to progressively turn fasteners and fittings in confined spaces, saving you time because you can continue to work without disconnecting or dismantling equipment to access hard-to-reach areas. The 30 and 60 degree angled heads provide greater coverage with fewer blind spots in limited access situations, and the beam is shifted up and out of the way to achieve the greatest range of motion in confined spaces. The shape of the head is also optimized for access and strength while also preventing jaw spread. We make our angle wrenches from 4140 chromium-molybdenum steel and harden them to 50–53 HRC. The wrenches are abrasive-blasted to create a finely textured satin finish and then plated with corrosion-resistant nickel. The wrenches have laser-engraved size markings and (with the exception of the smallest wrench sizes) chamfered handles. Our angle wrenches are manufactured entirely in the USA with USA-made materials. Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556757176605,"sku":"TT-WAE84211","price":22.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/durg4og18vboyoj1s0tq.jpg?v=1780092998"},{"product_id":"5-8-inch-combination-wrench","title":"5\/8 Inch Combination Wrench","description":"\u003cp\u003e• Angled Open End – To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Prevents Round-Off – In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of a fastener head and not the corners\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each combination wrench for quick identification\u003cbr\u003eEach Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of the fastener head rather than the corners, helping to prevent round-off. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556758028573,"sku":"TT-18259","price":15.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/f74mggipvvaxpq596dkf.jpg?v=1780092998"},{"product_id":"45-degree-offset-box-end-wrench-set-8-piece-1-4-1-1-4-in","title":"45-Degree Offset Box End Wrench Set, 8-Piece (1\/4 - 1-1\/4 in.)","description":"\u003cp\u003e• Generous Offset – Each end is offset 45 degrees, creating plenty of clearance for your fingers and allowing an easy reach over and around obstructions • 12-Point Openings – Doubling the access angles of 6-point wrenches, these 12-point openings make it easier to work in tight spaces • Non-Rounding Geometry – To prevent damaging round–off, the geometry of each opening contacts and applies force to the flat sides of fastener heads rather than the corners • No Skipped Sizes – This set contains every size from 1\/4 inch to 1 - 1\/4 inch\u003cbr\u003eTekton offset box end wrenches have a generous 45-degree offset, creating plenty of clearance for your fingers and allowing an easy reach over and around obstacles. The 12-point openings double the access angles of 6-point wrenches and make it easier to work in tight spaces. The geometry of each opening grips the flat sides of fastener heads, not the corners, preventing damaging round–off.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556758323485,"sku":"TT-WBE23008","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/wfgtfir0hgxzezzblska.jpg?v=1780092998"},{"product_id":"angle-head-open-end-wrench-set-27-piece-6-32-mm","title":"Angle Head Open End Wrench Set, 27-Piece (6-32 mm)","description":"\u003cp\u003e• Best Combination of Angles – We paired 30 and 60 degree angled heads to achieve greater coverage with fewer blind spots in limited access situations\n • Beam Position Improves Performance – To achieve the greatest range of motion in confined spaces, we shifted the wrench beam the maximum distance up and out of the way and reduced the radius where it meets the wrench head\n • Clear Size Markings – The wrench sizes are laser engraved onto both sides of each angle wrench with a large, permanent marking that's easy to read\n • Chamfered Handle – Except for the smallest sizes, the edges of the wrench beam are chamfered to provide a smooth, comfortable grip for your hands\n • Satin Finish – Our angle wrenches are made from 4140 chromium-molybdenum steel that's hardened to 50–53 HRC and abrasive-blasted for a finely textured finish\n • Michigan Manufacturing – Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility\u003cbr\u003eTekton Angle Head Open End Wrenches allow you to progressively turn fasteners and fittings in confined spaces, saving you time because you can continue to work without disconnecting or dismantling equipment to access hard-to-reach areas. The 30 and 60 degree angled heads provide greater coverage with fewer blind spots in limited access situations, and the beam is shifted up and out of the way to achieve the greatest range of motion in confined spaces. The shape of the head is also optimized for access and strength while also preventing jaw spread. We make our angle wrenches from 4140 chromium-molybdenum steel and harden them to 50–53 HRC. The wrenches are abrasive-blasted to create a finely textured satin finish and then plated with corrosion-resistant nickel. The wrenches have laser-engraved size markings and (with the exception of the smallest wrench sizes) chamfered handles. Our angle wrenches are manufactured entirely in the USA with USA-made materials. Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556758683933,"sku":"TT-WAE92003","price":455.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ox820lqev77coo995okk.jpg?v=1780092998"},{"product_id":"6-mm-stubby-combination-wrench","title":"6 mm Stubby Combination Wrench","description":"\u003cp\u003e• Shorter Length Improves Access – The stubby combination wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces\n • Angled Open End – To reduce the working swing arc, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage a fastener twice as often\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each wrench for quick identification\u003cbr\u003eEach Tekton Stubby Combination Wrench is permanently marked with a stamped size marking on both sides for easy identification. These stubby wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces. The 12-point box end doubles the available access angles compared to a 6-point end. In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of the fastener head and not the corners. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556759175453,"sku":"TT-18061","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/aug8kje15dh0hvu9zymf.jpg?v=1780092998"},{"product_id":"38-mm-angle-head-open-end-wrench","title":"38 mm Angle Head Open End Wrench","description":"\u003cp\u003e• Best Combination of Angles – We paired 30 and 60 degree angled heads to achieve greater coverage with fewer blind spots in limited access situations\n • Beam Position Improves Performance – To achieve the greatest range of motion in confined spaces, we shifted the wrench beam the maximum distance up and out of the way and reduced the radius where it meets the wrench head\n • Clear Size Markings – The wrench sizes are laser engraved onto both sides of each angle wrench with a large, permanent marking that's easy to read\n • Chamfered Handle – Except for the smallest sizes, the edges of the wrench beam are chamfered to provide a smooth, comfortable grip for your hands\n • Satin Finish – Our angle wrenches are made from 4140 chromium-molybdenum steel that's hardened to 50–53 HRC and abrasive-blasted for a finely textured finish\n • Michigan Manufacturing – Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility\u003cbr\u003eTekton Angle Head Open End Wrenches allow you to progressively turn fasteners and fittings in confined spaces, saving you time because you can continue to work without disconnecting or dismantling equipment to access hard-to-reach areas. The 30 and 60 degree angled heads provide greater coverage with fewer blind spots in limited access situations, and the beam is shifted up and out of the way to achieve the greatest range of motion in confined spaces. The shape of the head is also optimized for access and strength while also preventing jaw spread. We make our angle wrenches from 4140 chromium-molybdenum steel and harden them to 50–53 HRC. The wrenches are abrasive-blasted to create a finely textured satin finish and then plated with corrosion-resistant nickel. The wrenches have laser-engraved size markings and (with the exception of the smallest wrench sizes) chamfered handles. Our angle wrenches are manufactured entirely in the USA with USA-made materials. Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556762845469,"sku":"TT-WAE84238","price":88.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/bboixo18hak5irae3q63.jpg?v=1780093009"},{"product_id":"19-mm-angle-head-open-end-wrench","title":"19 mm Angle Head Open End Wrench","description":"\u003cp\u003e• Best Combination of Angles – We paired 30 and 60 degree angled heads to achieve greater coverage with fewer blind spots in limited access situations\n • Beam Position Improves Performance – To achieve the greatest range of motion in confined spaces, we shifted the wrench beam the maximum distance up and out of the way and reduced the radius where it meets the wrench head\n • Clear Size Markings – The wrench sizes are laser engraved onto both sides of each angle wrench with a large, permanent marking that's easy to read\n • Chamfered Handle – Except for the smallest sizes, the edges of the wrench beam are chamfered to provide a smooth, comfortable grip for your hands\n • Satin Finish – Our angle wrenches are made from 4140 chromium-molybdenum steel that's hardened to 50–53 HRC and abrasive-blasted for a finely textured finish\n • Michigan Manufacturing – Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility\u003cbr\u003eTekton Angle Head Open End Wrenches allow you to progressively turn fasteners and fittings in confined spaces, saving you time because you can continue to work without disconnecting or dismantling equipment to access hard-to-reach areas. The 30 and 60 degree angled heads provide greater coverage with fewer blind spots in limited access situations, and the beam is shifted up and out of the way to achieve the greatest range of motion in confined spaces. The shape of the head is also optimized for access and strength while also preventing jaw spread. We make our angle wrenches from 4140 chromium-molybdenum steel and harden them to 50–53 HRC. The wrenches are abrasive-blasted to create a finely textured satin finish and then plated with corrosion-resistant nickel. The wrenches have laser-engraved size markings and (with the exception of the smallest wrench sizes) chamfered handles. Our angle wrenches are manufactured entirely in the USA with USA-made materials. Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556762943773,"sku":"TT-WAE84219","price":28.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ck6p11zn2g9yluuhpqe5.jpg?v=1780093010"},{"product_id":"angle-head-open-end-wrench-set-with-modular-organizers-11-piece-3-8-1-in","title":"Angle Head Open End Wrench Set with Modular Organizers, 11-Piece (3\/8-1 in.)","description":"\u003cp\u003e• Best Combination of Angles – We paired 30 and 60 degree angled heads to achieve greater coverage with fewer blind spots in limited access situations\n • Beam Position Improves Performance – To achieve the greatest range of motion in confined spaces, we shifted the wrench beam the maximum distance up and out of the way and reduced the radius where it meets the wrench head\n • Clear Size Markings – The wrench sizes are laser engraved onto both sides of each angle wrench with a large, permanent marking that's easy to read\n • Chamfered Handle – Except for the smallest sizes, the edges of the wrench beam are chamfered to provide a smooth, comfortable grip for your hands\n • Satin Finish – Our angle wrenches are made from 4140 chromium-molybdenum steel that's hardened to 50–53 HRC and abrasive-blasted for a finely textured finish\n • Michigan Manufacturing – Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility\u003cbr\u003eTekton Angle Head Open End Wrenches allow you to progressively turn fasteners and fittings in confined spaces, saving you time because you can continue to work without disconnecting or dismantling equipment to access hard-to-reach areas. The 30 and 60 degree angled heads provide greater coverage with fewer blind spots in limited access situations, and the beam is shifted up and out of the way to achieve the greatest range of motion in confined spaces. The shape of the head is also optimized for access and strength while also preventing jaw spread. We make our angle wrenches from 4140 chromium-molybdenum steel and harden them to 50–53 HRC. The wrenches are abrasive-blasted to create a finely textured satin finish and then plated with corrosion-resistant nickel. The wrenches have laser-engraved size markings and (with the exception of the smallest wrench sizes) chamfered handles. Our angle wrenches are manufactured entirely in the USA with USA-made materials. Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility. This set includes modular wrench organizers that fit most toolbox drawers, keeping your wrenches neatly arranged with consistent spacing.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556763369757,"sku":"TT-WAE91502","price":204.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/y5zw9u5xltvmqcwx2noq.jpg?v=1780093010"},{"product_id":"45-degree-offset-box-end-wrench-set-12-piece-1-4-13-16-in-6-19-mm","title":"45-Degree Offset Box End Wrench Set, 12-Piece (1\/4 - 13\/16 in., 6 - 19 mm)","description":"\u003cp\u003e• 45-Degree Offset – The box ends are offset 45 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • 12-Point Box End – Fits multiple types of fasteners, including 6-point, 12-point, and square\n • Prevents Fastener Round-Off – Radiused corners apply force to the fastener's flat sides, rather than its corners\n • Clear Stamped Markings – A size marking is permanently stamped onto both sides of each wrench for quick identification\n • Strong 6140 Steel – Made from chromium-vanadium steel for strength and durability, and chrome-plated for corrosion resistance\u003cbr\u003eTekton offset box end wrenches have 45 degree offset box ends, creating clearance for your fingers and making it easier to reach around obstructions. The 12-point box ends fit multiple types of fasteners including 6-point, 12-point, and square. Radiused corners in the box ends apply force to a fastener's flat sides, rather than its corners, preventing fastener round-off. Each wrench is permanently marked with a stamped marking for easy size identification. The wrenches are made from 6140 chromium-vanadium steel and are heat-treated to 42–48 HRC. Chrome plating on the wrenches provide resistance to corrosion.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556792992029,"sku":"TT-WBE90301","price":125.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ruoe8p6kedp8kcuhq6l2.jpg?v=1780093047"},{"product_id":"3-4-x-13-16-inch-45-degree-offset-box-end-wrench","title":"3\/4 x 13\/16 Inch 45-Degree Offset Box End Wrench","description":"\u003cp\u003e• Ends are offset 45 degrees to reach over and around obstructions • 12-point openings double the access angles of a 6-point, making it easier to work in tight spaces • Box end geometry is designed to grip flat sides of fastener heads, not corners, to prevent round-off • Made of premium chrome vanadium steel with a mirror chrome finish\u003cbr\u003eMade to reach fasteners in difficult spaces, this wrench offers 12-point box ends that are generously offset 45 degrees to go over and around obstructions.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556793450781,"sku":"TT-WBE23319","price":24.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/euzufvfbswo083dms9lf.jpg?v=1780093047"},{"product_id":"angle-head-open-end-wrench-set-4-piece-1-5-16-1-1-2-in","title":"Angle Head Open End Wrench Set, 4-Piece (1-5\/16 - 1-1\/2 in.)","description":"\u003cp\u003e• Best Combination of Angles – We paired 30 and 60 degree angled heads to achieve greater coverage with fewer blind spots in limited access situations\n • Beam Position Improves Performance – To achieve the greatest range of motion in confined spaces, we shifted the wrench beam the maximum distance up and out of the way and reduced the radius where it meets the wrench head\n • Clear Size Markings – The wrench sizes are laser engraved onto both sides of each angle wrench with a large, permanent marking that's easy to read\n • Chamfered Handle – Except for the smallest sizes, the edges of the wrench beam are chamfered to provide a smooth, comfortable grip for your hands\n • Satin Finish – Our angle wrenches are made from 4140 chromium-molybdenum steel that's hardened to 50–53 HRC and abrasive-blasted for a finely textured finish\n • Michigan Manufacturing – Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility\u003cbr\u003eTekton Angle Head Open End Wrenches allow you to progressively turn fasteners and fittings in confined spaces, saving you time because you can continue to work without disconnecting or dismantling equipment to access hard-to-reach areas. The 30 and 60 degree angled heads provide greater coverage with fewer blind spots in limited access situations, and the beam is shifted up and out of the way to achieve the greatest range of motion in confined spaces. The shape of the head is also optimized for access and strength while also preventing jaw spread. We make our angle wrenches from 4140 chromium-molybdenum steel and harden them to 50–53 HRC. The wrenches are abrasive-blasted to create a finely textured satin finish and then plated with corrosion-resistant nickel. The wrenches have laser-engraved size markings and (with the exception of the smallest wrench sizes) chamfered handles. Our angle wrenches are manufactured entirely in the USA with USA-made materials. Machining, engraving, vibration polishing, abrasive-blasting, and plating take place at our Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556793483549,"sku":"TT-WAE91004","price":220.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/p5ezcbpymohas3stwxqt.jpg?v=1780093047"},{"product_id":"3-8-inch-stubby-combination-wrench","title":"3\/8 Inch Stubby Combination Wrench","description":"\u003cp\u003e• Shorter Length Improves Access – The stubby combination wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces\n • Angled Open End – To reduce the working swing arc, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage a fastener twice as often\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each wrench for quick identification\u003cbr\u003eEach Tekton Stubby Combination Wrench is permanently marked with a stamped size marking on both sides for easy identification. These stubby wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces. The 12-point box end doubles the available access angles compared to a 6-point end. In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of the fastener head and not the corners. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556793221405,"sku":"TT-18045","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/rf7gsqzlbb03uag8qnmo.jpg?v=1780093047"},{"product_id":"21-mm-combination-wrench","title":"21 mm Combination Wrench","description":"\u003cp\u003e• Angled Open End – To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Prevents Round-Off – In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of a fastener head and not the corners\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each combination wrench for quick identification\u003cbr\u003eEach Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of the fastener head rather than the corners, helping to prevent round-off. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556793188637,"sku":"TT-18292","price":20.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/cnqomtqctlbutque9cx5.jpg?v=1780093047"},{"product_id":"20-mm-combination-wrench","title":"20 mm Combination Wrench","description":"\u003cp\u003e• Angled Open End – To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Prevents Round-Off – In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of a fastener head and not the corners\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each combination wrench for quick identification\u003cbr\u003eEach Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of the fastener head rather than the corners, helping to prevent round-off. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556793876765,"sku":"TT-18291","price":20.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/p6sk9nbf5bsjgol7zxcw.jpg?v=1780093047"},{"product_id":"45-degree-offset-box-end-wrench-set-with-holders-12-piece-1-4-13-16-in-6-19-mm","title":"45-Degree Offset Box End Wrench Set with Holders, 12-Piece (1\/4 - 13\/16 in., 6 - 19 mm)","description":"\u003cp\u003e• Ends are offset 45 degrees to reach over and around obstructions • 12-point openings double the access angles of a 6-point, making it easier to work in tight spaces • Box end geometry is designed to grip flat sides of fastener heads, not corners, to prevent round-off • Made of premium chrome vanadium steel with a mirror chrome finish • Includes wrench holders with space-saving folding handles and nonslip grippers to lock in wrenches\u003cbr\u003eMade to reach fasteners in difficult spaces, the Tekton 12-pc. 45-Degree Offset Box End Wrench Set offers 12-point box ends that are generously offset 45 degrees to go over and around obstructions, compactly organized in the wrench holders with nonslip grippers that lock the wrenches in place when you're on the move.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556793942301,"sku":"TT-WBE91301","price":136.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/diy2yfhlypqmymuigmk4.jpg?v=1780093047"},{"product_id":"30-mm-combination-wrench","title":"30 mm Combination Wrench","description":"\u003cp\u003e• Angled Open End – To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Prevents Round-Off – In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of a fastener head and not the corners\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each combination wrench for quick identification\u003cbr\u003eEach Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of the fastener head rather than the corners, helping to prevent round-off. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556793843997,"sku":"TT-WCB24030","price":32.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/jgrlpwgzc6rco5wfblft.jpg?v=1780093047"},{"product_id":"9-32-inch-combination-wrench","title":"9\/32 Inch Combination Wrench","description":"\u003cp\u003e• Angled Open End – To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Prevents Round-Off – In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of a fastener head and not the corners\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each combination wrench for quick identification\u003cbr\u003eEach Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of the fastener head rather than the corners, helping to prevent round-off. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556793909533,"sku":"TT-18252","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/lvbs5hsnnh3zv2o7tik6.jpg?v=1780093047"},{"product_id":"9-mm-stubby-combination-wrench","title":"9 mm Stubby Combination Wrench","description":"\u003cp\u003e• Shorter Length Improves Access – The stubby combination wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces\n • Angled Open End – To reduce the working swing arc, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage a fastener twice as often\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each wrench for quick identification\u003cbr\u003eEach Tekton Stubby Combination Wrench is permanently marked with a stamped size marking on both sides for easy identification. These stubby wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces. The 12-point box end doubles the available access angles compared to a 6-point end. In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of the fastener head and not the corners. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556794794269,"sku":"TT-18064","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/e9eg0t4eiwy8cri1m1pf.jpg?v=1780093047"},{"product_id":"24-mm-combination-wrench","title":"24 mm Combination Wrench","description":"\u003cp\u003e• Angled Open End – To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Prevents Round-Off – In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of a fastener head and not the corners\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each combination wrench for quick identification\u003cbr\u003eEach Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of the fastener head rather than the corners, helping to prevent round-off. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556795056413,"sku":"TT-18295","price":23.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/iwlr8hve76cvzb6cxjhf.jpg?v=1780093047"},{"product_id":"11-32-inch-combination-wrench","title":"11\/32 Inch Combination Wrench","description":"\u003cp\u003e• Angled Open End – To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Prevents Round-Off – In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of a fastener head and not the corners\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each combination wrench for quick identification\u003cbr\u003eEach Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of the fastener head rather than the corners, helping to prevent round-off. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556795089181,"sku":"TT-18254","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/llmevoliwsfomyokrc7i.jpg?v=1780093047"},{"product_id":"stubby-combination-wrench-set-with-open-top-drawer-and-rack-25-piece-1-4-3-4-in-6-19-mm","title":"Stubby Combination Wrench Set with Open Top Drawer and Rack, 25-Piece (1\/4 - 3\/4 in., 6 - 19 mm)","description":"\u003cp\u003e• Part of the L-BOXX Stacking Organization System—This module easily integrates with all other components in the L-BOXX family of products\n • Secure Latch Connection – Press both side handles in and lift up to remove from the stack\n • Quick Access Drawer – Access drawer contents without taking apart your organization stack, and use the included write-on labels to easily identify the drawer contents\n • Optimized Laser-Marked Foam Layouts – We designed and cut the foam for this set in our Grand Rapids, Michigan manufacturing facility to optimize for high density, easy access, and secure fit\n • Two-Color Foam – Two color-contrasting foam layers are permanently bonded together with a heat lamination process, making any missing tools immediately visible\u003cbr\u003eThis Tekton stubby combination wrench set is part of the L-BOXX Stacking Organization System and easily integrates with all other components in the L-BOXX family of products, providing virtually infinite options for configuring your own custom organization system. The set includes a range of inch and metric stubby combination wrenches in an open top drawer and stacking drawer rack. The handles on the side of the stacking drawer rack provide stability when latching components together. Press both side handles in and lift up to remove the drawer from the stack. The open top drawer offers quick access to drawer contents without taking apart your organization stack. Included write-on labels allow for easy identification of drawer contents. The laser-marked foam layouts are designed and cut in our Grand Rapids, Michigan manufacturing facility to optimize for high density, easy access, and secure fit. The foam is made of two color-contrasting foam layers that are permanently bonded together with a heat lamination process, making any missing tools immediately visible.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556809015581,"sku":"TT-OLB94205","price":172.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/edwbzrtmtlh0ujz5avbz.jpg?v=1780093060"},{"product_id":"7-mm-combination-wrench","title":"7 mm Combination Wrench","description":"\u003cp\u003e• Angled Open End – To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Prevents Round-Off – In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of a fastener head and not the corners\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each combination wrench for quick identification\u003cbr\u003eEach Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of the fastener head rather than the corners, helping to prevent round-off. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556809769245,"sku":"TT-18276","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/r8xjdjwd0rrj3sedsgka.jpg?v=1780093060"},{"product_id":"15-mm-combination-wrench","title":"15 mm Combination Wrench","description":"\u003cp\u003e• Angled Open End – To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Prevents Round-Off – In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of a fastener head and not the corners\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each combination wrench for quick identification\u003cbr\u003eEach Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of the fastener head rather than the corners, helping to prevent round-off. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556810359069,"sku":"TT-18285","price":15.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/bcngqgttlchwzqakhurt.jpg?v=1780093061"},{"product_id":"stubby-and-standard-length-combination-wrench-set-71-piece-1-4-1-1-4-in-6-32-mm","title":"Stubby and Standard Length Combination Wrench Set, 71-Piece (1\/4 - 1-1\/4 in., 6-32 mm)","description":"\u003cp\u003e• Shorter Length Improves Access – The stubby combination wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces\n • Angled Open End – To reduce the working swing arc, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage a fastener twice as often\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each wrench for quick identification\u003cbr\u003eEach Tekton Combination Wrench is permanently marked with a stamped size marking on both sides for easy identification. The stubby wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces. The 12-point box end doubles the available access angles compared to a 6-point end. In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of the fastener head and not the corners. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556847649053,"sku":"TT-WCB90904","price":455.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/aybx253tzzl51hcenu0u.jpg?v=1780093109"},{"product_id":"3-8-inch-drive-x-3-4-inch-crowfoot-wrench","title":"3\/8 Inch Drive x 3\/4 Inch Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556855251229,"sku":"TT-WCF13119","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/kiw0abjdll7eyfqxbntd.jpg?v=1780093117"},{"product_id":"stubby-combination-wrench-set-with-rolls-25-piece-1-4-3-4-in-6-19-mm","title":"Stubby Combination Wrench Set with Rolls, 25-Piece (1\/4 - 3\/4 in., 6 - 19 mm)","description":"\u003cp\u003e• Shorter Length Improves Access – The stubby combination wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces\n  • Angled Open End – To reduce the working swing arc, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage a fastener twice as often\n  • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n  • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n  • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each wrench for quick identification\u003cbr\u003eEach Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of the fastener head rather than the corners, helping to prevent round-off. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often. Carry the wrenches anywhere with the included compact roll that keeps wrenches well-packed and unable to slide out. The polyurethane-backed 600 x 600 denier polyester is both abrasion and tear resistant, and has a Durable Water Repellent (DWR) coating. The roll design minimizes bulk from extra material so the wrenches can be quickly accessed without any fabric flaps getting in the way.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556855316765,"sku":"TT-WCB94403","price":151.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/entwimtl4tcqz8f7p9z4.jpg?v=1780093117"},{"product_id":"3-8-inch-drive-x-9-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 9 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556855513373,"sku":"TT-WCF16209","price":22.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/lddr3nxxvlpgeiiwig5i.jpg?v=1780093118"},{"product_id":"3-8-inch-drive-x-13-mm-crowfoot-wrench","title":"3\/8 Inch Drive x 13 mm Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556855546141,"sku":"TT-WCF14113","price":22.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/np5ra5wddai6aigdvtsg.jpg?v=1780093118"},{"product_id":"stubby-and-standard-length-combination-wrench-set-with-holders-50-piece-1-4-3-4-in-6-19-mm","title":"Stubby and Standard Length Combination Wrench Set with Holders, 50-Piece (1\/4-3\/4 in., 6-19 mm)","description":"\u003cp\u003e• Shorter Length Improves Access – The stubby combination wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces\n • Angled Open End – To reduce the working swing arc, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage a fastener twice as often\n • Offset Box End – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions\n • 12-Point Box End – Doubles the available access angles compared to a 6-point end\n • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each wrench for quick identification\u003cbr\u003eEach Tekton Combination Wrench is permanently marked with a stamped size marking on both sides for easy identification. The stubby wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces. The 12-point box end doubles the available access angles compared to a 6-point end. In order to prevent rounding off fasteners, the box end is designed to contact and apply force to the sides of the fastener head and not the corners. The 15-degree offset box end creates clearance for your fingers and makes it easier to reach around obstructions. To reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often. This set includes low-profile wrench holders with flexible teeth that hold the wrenches. The handles can be folded up to help save space, and the holders fit into most shallow tool cabinet drawers.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556855644445,"sku":"TT-WCB92902","price":236.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/sl3iqwnkw7zvzctcrboi.jpg?v=1780093118"},{"product_id":"3-8-inch-drive-x-22-mm-crowfoot-wrench","title":"3\/8 Inch Drive x 22 mm Crowfoot Wrench","description":"\u003cp\u003e• Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess • Exceeds Performance Standards – Tekton 3\/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.100-2020 strength requirements for minimum proof torque • Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish • Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench • Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read\u003cbr\u003eTekton crowfoot wrenches are part of our system of access wrenches, designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a better fit in the jaws, as the plating material doesn't accumulate at the tips as with conventional chrome plating. Additionally, this process has a lower environmental impact since it doesn't require the use and disposal of chromium. We make the wrenches entirely in the USA with USA-sourced materials. The steps of machining, broaching, engraving, vibration polishing, abrasive blasting, and plating all take place locally at Tekton's Grand Rapids, Michigan manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556855873821,"sku":"TT-WCF14122","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/xpoxgiuevkmivztnw6jv.jpg?v=1780093119"},{"product_id":"3-8-inch-drive-6-point-flare-nut-crowfoot-wrench-set-9-piece-5-16-3-4-in","title":"3\/8 Inch Drive 6-Point Flare Nut Crowfoot Wrench Set, 9-Piece (5\/16 - 3\/4 in.)","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eThis Tekton 3\/8 Inch Drive Flare Nut Crowfoot Wrench Set features a complete range from 5\/16 to 3\/4 inch. The sizes of our flare nut crowfoot wrenches scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556855906589,"sku":"TT-WCF90120","price":136.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/c9jsv16wwqgtgbc4vst3.jpg?v=1780093119"},{"product_id":"3-8-inch-drive-x-11-16-inch-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 11\/16 Inch 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556859478301,"sku":"TT-WCF15217","price":26.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/lxhp7rkjxtz34p1bltjo.jpg?v=1780093120"},{"product_id":"3-8-inch-drive-x-14-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 14 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556912857373,"sku":"TT-WCF16214","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/mrviqx7k0pjn8dubnzjc.jpg?v=1780093178"},{"product_id":"3-8-inch-drive-x-22-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 22 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556913742109,"sku":"TT-WCF16222","price":30.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/dni9viw6b0qjxr25fjyf.jpg?v=1780093178"},{"product_id":"3-8-inch-drive-x-13-mm-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 13 mm 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556913774877,"sku":"TT-WCF16213","price":24.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/d92ruswnldqqxgmpizlb.jpg?v=1780093178"},{"product_id":"21-mm-long-fixed-flex-head-12-point-ratcheting-box-end-wrench","title":"21 mm Long Fixed\/Flex Head 12-Point Ratcheting Box End Wrench","description":"\u003cp\u003e• One Wrench Size, Two Head Styles – The double box ends are the same size and both are 12-point, but one side features a raised fixed head while the other has a ratcheting flex head\n • Versatile Fixed Head – The fixed box end has a flush side to maximize surface contact with a fastener as well as a raised side for finger clearance and to fit into recessed areas\n • Ratcheting Flex Head – The ratcheting end reduces the need to re-engage the fastener repeatedly, and the flex joint sweeps smoothly through 180 degrees without any set positions, allowing the wrench to access fasteners around obstacles\n • Clear Markings – Tekton fixed\/flex head ratcheting wrenches are permanently marked in two ways: a high-visibility laser marking and a stamped marking\n • Materials and Finish – These wrenches are made from 6140 Cr-V steel, heat-treated to 42–49 HRC, abrasive-blasted for a finely textured finish, and plated with a trivalent chrome process\u003cbr\u003eTekton Long Fixed\/Flex Head 12-Point Ratcheting Box End Wrenches each have one wrench size and two head styles. The double box ends are the same size and both are 12-point, but one side features a raised fixed head while the other has a ratcheting flex head. The fixed box end has a flush side to maximize surface contact with a fastener as well as a raised side for finger clearance and to fit into recessed areas. The ratcheting end reduces the need to re-engage the fastener repeatedly. The flex joint sweeps smoothly through 180 degrees without any set positions, allowing the wrench to access fasteners around obstacles. The 12-point box ends fit multiple types of fasteners, including 6-point, 12-point, and square. Tekton fixed\/flex head ratcheting wrenches are permanently marked in two ways: a high-visibility laser marking and a stamped marking. We make these wrench bodies from 6140 chromium-vanadium steel and heat-treat them to 42–49 HRC. The wrenches are abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556913709341,"sku":"TT-WRB35421","price":57.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/il7vofousx8kr92ozfud.jpg?v=1780093178"},{"product_id":"8-mm-long-fixed-flex-head-12-point-ratcheting-box-end-wrench","title":"8 mm Long Fixed\/Flex Head 12-Point Ratcheting Box End Wrench","description":"\u003cp\u003e• One Wrench Size, Two Head Styles – The double box ends are the same size and both are 12-point, but one side features a raised fixed head while the other has a ratcheting flex head\n • Versatile Fixed Head – The fixed box end has a flush side to maximize surface contact with a fastener as well as a raised side for finger clearance and to fit into recessed areas\n • Ratcheting Flex Head – The ratcheting end reduces the need to re-engage the fastener repeatedly, and the flex joint sweeps smoothly through 180 degrees without any set positions, allowing the wrench to access fasteners around obstacles\n • Clear Markings – Tekton fixed\/flex head ratcheting wrenches are permanently marked in two ways: a high-visibility laser marking and a stamped marking\n • Materials and Finish – These wrenches are made from 6140 Cr-V steel, heat-treated to 42–49 HRC, abrasive-blasted for a finely textured finish, and plated with a trivalent chrome process\u003cbr\u003eTekton Long Fixed\/Flex Head 12-Point Ratcheting Box End Wrenches each have one wrench size and two head styles. The double box ends are the same size and both are 12-point, but one side features a raised fixed head while the other has a ratcheting flex head. The fixed box end has a flush side to maximize surface contact with a fastener as well as a raised side for finger clearance and to fit into recessed areas. The ratcheting end reduces the need to re-engage the fastener repeatedly. The flex joint sweeps smoothly through 180 degrees without any set positions, allowing the wrench to access fasteners around obstacles. The 12-point box ends fit multiple types of fasteners, including 6-point, 12-point, and square. Tekton fixed\/flex head ratcheting wrenches are permanently marked in two ways: a high-visibility laser marking and a stamped marking. We make these wrench bodies from 6140 chromium-vanadium steel and heat-treat them to 42–49 HRC. The wrenches are abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556914200861,"sku":"TT-WRB35408","price":32.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/cy6kuh52fkznqdmx5sex.jpg?v=1780093178"},{"product_id":"1-inch-long-fixed-flex-head-12-point-ratcheting-box-end-wrench","title":"1 Inch Long Fixed\/Flex Head 12-Point Ratcheting Box End Wrench","description":"\u003cp\u003e• One Wrench Size, Two Head Styles – The double box ends are the same size and both are 12-point, but one side features a raised fixed head while the other has a ratcheting flex head\n • Versatile Fixed Head – The fixed box end has a flush side to maximize surface contact with a fastener as well as a raised side for finger clearance and to fit into recessed areas\n • Ratcheting Flex Head – The ratcheting end reduces the need to re-engage the fastener repeatedly, and the flex joint sweeps smoothly through 180 degrees without any set positions, allowing the wrench to access fasteners around obstacles\n • Clear Markings – Tekton fixed\/flex head ratcheting wrenches are permanently marked in two ways: a high-visibility laser marking and a stamped marking\n • Materials and Finish – These wrenches are made from 6140 Cr-V steel, heat-treated to 42–49 HRC, abrasive-blasted for a finely textured finish, and plated with a trivalent chrome process\u003cbr\u003eTekton Long Fixed\/Flex Head 12-Point Ratcheting Box End Wrenches each have one wrench size and two head styles. The double box ends are the same size and both are 12-point, but one side features a raised fixed head while the other has a ratcheting flex head. The fixed box end has a flush side to maximize surface contact with a fastener as well as a raised side for finger clearance and to fit into recessed areas. The ratcheting end reduces the need to re-engage the fastener repeatedly. The flex joint sweeps smoothly through 180 degrees without any set positions, allowing the wrench to access fasteners around obstacles. The 12-point box ends fit multiple types of fasteners, including 6-point, 12-point, and square. Tekton fixed\/flex head ratcheting wrenches are permanently marked in two ways: a high-visibility laser marking and a stamped marking. We make these wrench bodies from 6140 chromium-vanadium steel and heat-treat them to 42–49 HRC. The wrenches are abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556914233629,"sku":"TT-WRB35325","price":61.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/pfpu64etkbaljqnbbfat.jpg?v=1780093178"},{"product_id":"3-8-inch-drive-x-3-4-inch-6-point-flare-nut-crowfoot-wrench","title":"3\/8 Inch Drive x 3\/4 Inch 6-Point Flare Nut Crowfoot Wrench","description":"\u003cp\u003e• Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping • Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading • 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles • Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating • Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan\u003cbr\u003eTekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556914987293,"sku":"TT-WCF15219","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/alhcv1kme2j4rcdm5m0i.jpg?v=1780093179"},{"product_id":"17-mm-reversible-12-point-ratcheting-combination-wrench","title":"17 mm Reversible 12-Point Ratcheting Combination Wrench","description":"\u003cp\u003e• Reversible Wrench Geometry – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions • 12-Point Box End – The 72-tooth ratcheting box end wrench requires a working swing ark of only 5-degrees and fits multiple types of fasteners, including 6-point, 12-point, and square • Drive Switch – The drive switch allows you to easily switch ratcheting directions while working • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each ratcheting wrench for quick identification • Smooth, Satin Chrome Finish – Each wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process\u003cbr\u003eEach Tekton reversible ratcheting combination wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The 15-degree offset box end wrench geometry creates clearance for your fingers and makes it easier to reach around obstructions. The drive switch allows you to quickly switch ratcheting directions while you're working. The wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process, ensuring that the finish won't flake off or corrode over time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556915052829,"sku":"TT-WRC23417","price":28.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/a1s53aygooqgypuik6n5.jpg?v=1780093180"},{"product_id":"11-16-inch-flex-head-12-point-ratcheting-combination-wrench","title":"11\/16 Inch Flex Head 12-Point Ratcheting Combination Wrench","description":"\u003cp\u003e• 180-Degree Flex Head – The flex head sweeps smoothly through 180-degrees without any set positions • Navigate Around Obstructions – The flex head allows the wrench to operate at any angle and navigate around obstructions in its swing path • 12-Point Box End – The 72-tooth ratcheting box end wrench requires a working swing ark of only 5-degrees and fits multiple types of fasteners, including 6-point, 12-point, and square • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each ratcheting wrench for quick identification • Smooth, Satin Chrome Finish – Each wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process\u003cbr\u003eEach Tekton ratcheting flex head wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The flex head sweeps smoothly through 180-degrees without any set positions. This allows the wrench to operate at any angle and navigate around obstructions in its swing path. The wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process, ensuring that the finish won't flake off or corrode over time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556919083293,"sku":"TT-WRC26317","price":28.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/vv7kekqdd74qgwja5alm.jpg?v=1780093183"},{"product_id":"9-16-inch-reversible-12-point-ratcheting-combination-wrench","title":"9\/16 Inch Reversible 12-Point Ratcheting Combination Wrench","description":"\u003cp\u003e• Reversible Wrench Geometry – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions • 12-Point Box End – The 72-tooth ratcheting box end wrench requires a working swing ark of only 5-degrees and fits multiple types of fasteners, including 6-point, 12-point, and square • Drive Switch – The drive switch allows you to easily switch ratcheting directions while working • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each ratcheting wrench for quick identification • Smooth, Satin Chrome Finish – Each wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process\u003cbr\u003eEach Tekton reversible ratcheting combination wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The 15-degree offset box end wrench geometry creates clearance for your fingers and makes it easier to reach around obstructions. The drive switch allows you to quickly switch ratcheting directions while you're working. The wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process, ensuring that the finish won't flake off or corrode over time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556919050525,"sku":"TT-WRC23314","price":26.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/iuej4pdmjg3vr7rgvvti.jpg?v=1780093183"},{"product_id":"7-16-inch-reversible-12-point-ratcheting-combination-wrench","title":"7\/16 Inch Reversible 12-Point Ratcheting Combination Wrench","description":"\u003cp\u003e• Reversible Wrench Geometry – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions • 12-Point Box End – The 72-tooth ratcheting box end wrench requires a working swing ark of only 5-degrees and fits multiple types of fasteners, including 6-point, 12-point, and square • Drive Switch – The drive switch allows you to easily switch ratcheting directions while working • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each ratcheting wrench for quick identification • Smooth, Satin Chrome Finish – Each wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process\u003cbr\u003eEach Tekton reversible ratcheting combination wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The 15-degree offset box end wrench geometry creates clearance for your fingers and makes it easier to reach around obstructions. The drive switch allows you to quickly switch ratcheting directions while you're working. The wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process, ensuring that the finish won't flake off or corrode over time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556932878621,"sku":"TT-WRC23311","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/doulsvb8btveirx7pwsp.jpg?v=1780093196"},{"product_id":"14-mm-reversible-12-point-ratcheting-combination-wrench","title":"14 mm Reversible 12-Point Ratcheting Combination Wrench","description":"\u003cp\u003e• Reversible Wrench Geometry – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions • 12-Point Box End – The 72-tooth ratcheting box end wrench requires a working swing ark of only 5-degrees and fits multiple types of fasteners, including 6-point, 12-point, and square • Drive Switch – The drive switch allows you to easily switch ratcheting directions while working • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each ratcheting wrench for quick identification • Smooth, Satin Chrome Finish – Each wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process\u003cbr\u003eEach Tekton reversible ratcheting combination wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The 15-degree offset box end wrench geometry creates clearance for your fingers and makes it easier to reach around obstructions. The drive switch allows you to quickly switch ratcheting directions while you're working. The wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process, ensuring that the finish won't flake off or corrode over time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556936155421,"sku":"TT-WRC23414","price":26.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/ri2rmxkdrz3pybty3gdq.jpg?v=1780093199"},{"product_id":"11-16-inch-reversible-12-point-ratcheting-combination-wrench","title":"11\/16 Inch Reversible 12-Point Ratcheting Combination Wrench","description":"\u003cp\u003e• Reversible Wrench Geometry – The box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions • 12-Point Box End – The 72-tooth ratcheting box end wrench requires a working swing ark of only 5-degrees and fits multiple types of fasteners, including 6-point, 12-point, and square • Drive Switch – The drive switch allows you to easily switch ratcheting directions while working • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each ratcheting wrench for quick identification • Smooth, Satin Chrome Finish – Each wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process\u003cbr\u003eEach Tekton reversible ratcheting combination wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The 15-degree offset box end wrench geometry creates clearance for your fingers and makes it easier to reach around obstructions. The drive switch allows you to quickly switch ratcheting directions while you're working. The wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process, ensuring that the finish won't flake off or corrode over time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556936188189,"sku":"TT-WRC23317","price":28.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/srd3d7qmfppji9suhcbl.jpg?v=1780093202"},{"product_id":"1-7-16-inch-service-wrench","title":"1-7\/16 Inch Service Wrench","description":"\u003cp\u003e• Part of a System of Access Wrenches – Tekton service wrenches are short-handled, open-end access wrenches with a 15-degree angled head on one side and a drive square on the other, and they complement our other access wrenches\n • Drive Square in Handle – The drive square can be used with a ratchet or other drive tools to increase access or leverage and apply specific torque; four detent grooves secure the connection\n • Thin Jaw for More Access – Our service wrench jaws are much leaner than our standard combination wrenches, with 33% to 46% less jaw thickness (depending on the size), providing better access in tight spaces and on thin fittings\n • 4140 Steel, Satin Nickel Finish – We make our service wrenches from 4140 chromium molybdenum steel and harden them to 50–53 HRC, then abrasive-blast them to create a finely textured satin finish and plate them with corrosion-resistant nickel\n • Manufactured in Michigan – Our service wrenches are made entirely in the USA with USA-sourced materials; machining, broaching, engraving, vibration polishing, abrasive blasting, and plating take place at our Grand Rapids, Michigan, manufacturing facility\u003cbr\u003eTekton service wrenches are short-handled, open-end access wrenches with a 15-degree angled head on one side and a drive square on the other. They complement our other access wrenches, including crowfoot, flare nut crowfoot, and angle head wrenches. The drive square at the end of the handle adds versatility when paired with a ratchet or a torque wrench, and has detent grooves on all four sides. Wrench sizes with a 3\/8 inch drive square include 3\/4–1-1\/2 inch and 19–38 mm. Wrench sizes with a 1\/2 inch drive square include 1-9\/16–2-5\/8 inch and 41–50 mm. The center-to-center distance between the drive square and the hex opening is engraved on the handle for quick reference when using the service wrench as a torque adapter. Our service wrench jaws are much leaner than our standard combination wrenches, with 33% to 46% less jaw thickness (depending on the size). The tip of each jaw has a 10-degree lead-in taper that helps align the wrench with the hex flats when visibility is limited. We make our service wrenches from 4140 chromium molybdenum steel and harden them to 50–53 HRC. The wrenches are abrasive-blasted to create a finely textured satin finish and then plated with corrosion-resistant nickel that is easy to wipe clean. Our service wrenches are made entirely in the USA with USA-sourced materials. Machining, broaching, engraving, vibration polishing, abrasive blasting, and plating take place at our Grand Rapids, Michigan, manufacturing facility.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556966727965,"sku":"TT-WSE14336","price":46.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/gdkrgrtv8rbzlk4h6omf.jpg?v=1780093232"},{"product_id":"7-16-inch-flex-head-12-point-ratcheting-combination-wrench","title":"7\/16 Inch Flex Head 12-Point Ratcheting Combination Wrench","description":"\u003cp\u003e• 180-Degree Flex Head – The flex head sweeps smoothly through 180-degrees without any set positions • Navigate Around Obstructions – The flex head allows the wrench to operate at any angle and navigate around obstructions in its swing path • 12-Point Box End – The 72-tooth ratcheting box end wrench requires a working swing ark of only 5-degrees and fits multiple types of fasteners, including 6-point, 12-point, and square • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each ratcheting wrench for quick identification • Smooth, Satin Chrome Finish – Each wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process\u003cbr\u003eEach Tekton ratcheting flex head wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The flex head sweeps smoothly through 180-degrees without any set positions. This allows the wrench to operate at any angle and navigate around obstructions in its swing path. The wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process, ensuring that the finish won't flake off or corrode over time.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556966695197,"sku":"TT-WRC26311","price":25.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/teif8vfy4slgnpxjcu2v.jpg?v=1780093232"},{"product_id":"flex-head-12-point-ratcheting-combination-wrench-set-with-modular-organizers-11-piece-1-4-3-4-in","title":"Flex Head 12-Point Ratcheting Combination Wrench Set with Modular Organizers, 11-Piece (1\/4-3\/4 in.)","description":"\u003cp\u003e• 180-Degree Flex Head – The flex head sweeps smoothly through 180-degrees without any set positions • Navigate Around Obstructions – The flex head allows the wrench to operate at any angle and navigate around obstructions in its swing path • 12-Point Box End – Fits multiple types of fasteners, including 6-point, 12-point, and square • Clear, Stamped Markings – A size marking is permanently stamped onto both sides of each ratcheting wrench for quick identification • Smooth, Satin Chrome Finish – Each wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process\u003cbr\u003eEach Tekton ratcheting flex head wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The 1\/4, 9\/32, 5\/16, and 11\/32 inch wrenches have 60-tooth ratcheting mechanisms, the rest have 72-tooth mechanisms. The flex head sweeps smoothly through 180-degrees without any set positions. This allows the wrench to operate at any angle and navigate around obstructions in its swing path. The wrench is abrasive-blasted to create a finely textured finish and then plated with a trivalent chrome process, ensuring that the finish won't flake off or corrode over time. The set includes a modular wrench organizer that fits most toolbox drawers, keeping your ratcheting wrenches neatly arranged with consistent spacing.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BoltsandNuts.com","offers":[{"title":"1","offer_id":51556967973149,"sku":"TT-WRC95300","price":167.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/9517\/5197\/files\/b8ftfnqzu4n4tzf4tdtp.jpg?v=1780093232"}],"url":"https:\/\/industrialwarehouse.com\/collections\/tekton-wrenches.oembed?page=5","provider":"Industrial Warehouse","version":"1.0","type":"link"}